nealm66

Tourist + Hemorrhoid = Tourhoid = general pain in the..... Living in the Pismo Beach area, I encounter plenty of them.... Back to...

We used a little Hornady bullet for fire forming that if I remember correctly, would come apart like a varmint grenade. I’ll try and...

One thing I noticed with his rifle was the new brass was extremely short so definitely needed fire formed before load development

I just finished helping a buddy load up some little pointy hammer bullets in a bolt 30-30. Same issues with the coal in magazine. I know...

I forgot the topic ... 😆

If you are limited to factory ammo, I would look hard at the Weatherby factory Hammer Hunter load. Hammers are very forgiving from a...

I made this turret band for my scope, with yardages (black numbers) and mils (red numbers). This should allow a relatively quick...

That’s exactly what I did on a couple of my brothers rifles. For the absolutes I just walked a target out and marked the turret. The...

He didn’t see it. lol.

Five grand for a custom rifle and another 2 grand for the optics. I just don't have the heart to wrap a piece of painter's tape around...

The problem is all the hammer bullets before the hht’s work extremely well so no huge reason to change. Bad business model

Im shooting the 140gn Absolute out of my 280ai at 3200fps. My friend is shooting the 132HHT out of his 7mmRM at 3300fps. Note: Both are...

I got lucky on this last dial. Leupold has a 25% of on dials going o. Recently. I gave the the data and serial number of scope. He said...

Instead of using expensive custom turrets I wrap white electrical tape around the circumference of the turret with corresponding yardage...

I have used Hammer Hunters and Absolutes, with the Absolutes you have to be able to read pressures as stated previously but if you are...