speed lock fireing pin's

buzzard

Member
Joined
Jul 23, 2006
Messages
22
speed lock fireing pin\'s

I have a rem 700 and want to inprove accuracy will a speed lock fireing pin help. I just finshed a Tubb's final finsh on a rem 7400 and was inpresed surnk My grop by over and inch by the way I decopperd every three shots to keep from laping copper
 
Re: speed lock fireing pin\'s

Hey Buzz,

I missed this post but responded to your email .

Rather than rehash what I have already said in the email I will bump this back to top to let those that have tried or are using the speedlock pin and spring .

C'mon folks , talk to Buzz here .

Jim B.
 
Re: speed lock fireing pin\'s

I'm not gonna put any money on it but I replace all my factory firing pins with the ones that Greg Tannel makes which are lightened with heavier spring to shorten lock time.
I did put a Tubbs pin kit in a Savage after it came back from Kevin Rayhill for truing and timing , the gun shot alot better when I got it back but their was alot of other stuff done to it other than the pin.

I'm sure it can't hurt.
 
Warning! This thread is more than 18 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top