RESETTING ZERO STOP ON NX8

Ashlo84

Member
Joined
Dec 23, 2021
Messages
10
Location
Great falls montana
Hello all!
I bought a NX8 last year and zeroed it. I recently added a suppressor to thay setup and my load was approximately 2.25 moa low. I can't seem to find any information on resetting the zero.
I don't know what I'm missing here, should be fairly simple 🤷 thanks in advance for any help.
 
Take turret off
Loosen 4 small screws on clutch assembly
Turn clutch desired direction
Tighten the 4 screws
Put turret back on and tighten those screws.
Ok I think I was completely over thinking this. I now realize by loosening those four set screws your essentially giving yourself room to play with the clutch mechanism. Thank you for putting up with my ignorance.
 
If you are now hitting low (which is totally understandable with a new suppressor hanging on the end of the barrel), dial up and shoot until you get your POI zero where you want it again.

THEN, do this as @8andbait detailed:

Take turret off
Loosen 4 small screws on clutch assembly
Turn clutch desired direction
Tighten the 4 screws
Put turret back on at zero and tighten those screws.
 

Recent Posts

Top