Powder Burn Rate Charts

[MountainMariner]

Wondering if everyone could post links to the "current" most up to date powder burn rate charts here.

 

[J E Custom]

Wondering if everyone could post links to the "current" most up to date powder burn rate charts here.

Hear is a good one.

http://www.lapua.com/upload/reloading/reloadingburningratechart2011.pdf

J E CUSTOM

 

[FEENIX]

Here's another ...

 

[J E Custom]

And another one.

http://www.hodgdon.com/PDF/Burn Rates - 2014-2015.pdf


J E CUSTOM

 

[MountainMariner]

Thanks. I see some of the new powders are listed too. Exactly what I was looking for.

 

[AZShooter]

Finally RL-17 is now showing but not RL-33.

 

[J E Custom]

Finally RL-17 is now showing but not RL-33.

I found this on RE 33, It is not very much but it should get you started with RE33.

Alliant Powder - Reloader's Guide

Example; There are only 4 loads for the 338 Lapua (The cartridge 33 was made for) but it's a
starting point.

J E CUSTOM

 

[FEENIX]

I found this on RE 33, It is not very much but it should get you started with RE33.

Alliant Powder - Reloader's Guide

Example; There are only 4 loads for the 338 Lapua (The cartridge 33 was made for) but it's a
starting point.

J E CUSTOM

Found this to add FWIW >>> http://forum.snipershide.info/showthread.php?t=187193

 

[AZShooter]

I don't need load data for RL-33 just wanted to see a definitive value of where it was on the burn chart.

I was one of the first guys to try any several years ago. Since then I have used it in the 6mm-284, 257 Weatherby, 7mm/375 Ruger, 300 Rum and 7 Rem mag. It seems to work best with the heaviest for the caliber bullets.

thanks gentlemen.