Non magnum primer with a 7 PRC

[ButterBean]

I already have them loaded so I will run them through just for the heck of it.
If nothing else hopefully I can find a fair load in case I can't get the perfect powder

RL25 is the stuff in the STW

 

[Ckleeves]

I wouldn't be surprised to see tighter numbers across the chrony with a non mag vs a mag primer with H-1000 and those charge weights.

 

[victor3ranger]

RL25 is the stuff in the STW

My problem is that anything RL is Unicorn farts here.

 

[ButterBean]

My problem is that anything RL is Unicorn farts here.

The 7828 works well in the STW

 

[Barbourcreek]

will be fine

 

[victor3ranger]

The 7828 works well in the STW

You were right, I did find one pretty fair load with WMR but the 7828 was better

 

[CrankyYankee]

@mdruyle

Which LRM primers do you use?

I'm next door in GA and might be able to help ya until you find more.

Will

 

[mdruyle]

@mdruyle

Which LRM primers do you use?

I'm next door in GA and might be able to help ya until you find more.

Will

Sending a pm.

 

[victor3ranger]

@mdruyle

Which LRM primers do you use?

I'm next door in GA and might be able to help ya until you find more.

Will

Give me a pm if you can

 

[Joefrazell]

Shouldn't have any issues with non mag primers in a 7prc

 

[Sneuses]

My problem is that anything RL is Unicorn farts here.

Not so, been very fortunate over Christmas Santa has been smiling upon me

 

[blvette75]

Well I am going to try my standard primers first for my PRC I am loading the ELDX bullets. I am saving my magnum primers for when I believe I will need them based upon my past loading endeavors in my magnum calibers. When the primers were readily available and prices were reasonable I used to load three to compare. At times this made a difference in optimizing accuracy, not really that big of difference but certain loads it helped. But honestly the way the primer prices have shot through the roof, I will no longer test the primers, but just use what I have.

 

[victor3ranger]

Not so, been very fortunate over Christmas Santa has been smiling upon me

Lucky you

 

[Philward]

It's interesting that I was just looking over some Speer load data for 257 Roberts and whenever they used ball powder, AA2700, W760, H380 & 414, they specified CCI250 primers with charge weights of only 40-45g. I have some 100g bullets loaded with 2700 and standard LR primers(Rem9.5 and CCI200) and will see how they work. Should be fine.