Large bore barrel for cut away project

[Barretn]

Looking for a large bore barrel for a cut away display. Shot out barrel would be perfect.

If anyone has a drop from a straight barrel I could make one also.

 

[Muddyboots]

.270 big enough?

 

[Barretn]

.270 big enough?

I would like a 50 or 338 but 30 would be a minimum. Thank you for asking and your time.

 

[Blancoalex]

I may have a 30cal and remote possibility for 338, how long and what diameter does it need to be? I even have a old Rem 700 30/06 milled off too show chamber and throat into refiling.

 

[Barretn]

I may have a 30cal and remote possibility for 338, how long and what diameter does it need to be? I even have a old Rem 700 30/06 milled off too show chamber and throat into refiling.

Ideally I would like to have the breach end to thread and chamber if it is not already done. Most likely would thread it for a 700 so 1.0625 OD

 

[Blancoalex]

Ideally I would like to have the breach end to thread and chamber if it is not already done. Most likely would thread it for a 700 so 1.0625 OD

OK, can check this weekend when back at ranch shop.

 

[Blancoalex]

Howdy, found this in scrap pile. Think was 308 Win. Plenty meat to start over if you flip around. PM me if want and can send Monday or Tuesday.