floyd kittrell
Well-Known Member
Jewell , Jewell , Jewell !!!
Unless you can get a Bix AndyJewell , Jewell , Jewell !!!
I have a Big Horn Origin L/A on the way.....looking for a trigger.
Im looking for a trigger that adjusts safely from 0.5lb - 2.25 lbs. This is kind of a wish range. I think I would like 4-8 oz when shooting off the bench and about 1.75-2.25lb in the field. The point of this post is that there is more to a trigger than weight.
Weight is important, but I need the safety to be absolutely reliable. I also want a nice crisp short pull with very good resistance to jarring off. I get that super light triggers maybe more sensitive and that is ok as long as it is hunting safe at 1.5lb.
I have used Triggertech, Timney, Geisslle and Jard in the past. Timney for my Win 70 is so far my favorite overall.
I'm basically down to:
Remington 700 Special Trigger // TriggerTech
The Rem 700 Special is an upgraded version of our primary model which further enhances accuracy & precision on any right-handed Remington 700 model rifle.triggertech.com
Remington 700 Diamond Trigger // TriggerTech
The TriggerTech Diamond Rem 700 Trigger was designed to meet the requirements of leading competitive shooters with a pull weight range of <4 oz to 32 oz.triggertech.com
I haven't really considered a 2 stage yet...
Any thoughts on this...I'm leaning towards Jewel as their reputation is quite good.
Not Jewel. Trigger Tech hands down. I've run Jewel (hated it and IMO have no buisiness on field guns) , Timney, and the Trigger Tech Diamond as well as the Trigger Tech Special. TT are amazing triggers. Reliable, crisp and easy to adjust. I ran the Diamond on the comp rifle and my daughters rifle has the special. I don't like hair triggers so typically won't set them for anything less than 1.5lbs or so. The Diamond allows you to adjust down to 4oz I believe , which is ridiculous, but it it's a beautiful trigger and you can adjust them without pulling the action out of the stock. It's just 1 Allen screw.I have a Big Horn Origin L/A on the way.....looking for a trigger.
Im looking for a trigger that adjusts safely from 0.5lb - 2.25 lbs. This is kind of a wish range. I think I would like 4-8 oz when shooting off the bench and about 1.75-2.25lb in the field. The point of this post is that there is more to a trigger than weight.
Weight is important, but I need the safety to be absolutely reliable. I also want a nice crisp short pull with very good resistance to jarring off. I get that super light triggers maybe more sensitive and that is ok as long as it is hunting safe at 1.5lb.
I have used Triggertech, Timney, Geisslle and Jard in the past. Timney for my Win 70 is so far my favorite overall.
I'm basically down to:
Remington 700 Special Trigger // TriggerTech
The Rem 700 Special is an upgraded version of our primary model which further enhances accuracy & precision on any right-handed Remington 700 model rifle.triggertech.com
Remington 700 Diamond Trigger // TriggerTech
The TriggerTech Diamond Rem 700 Trigger was designed to meet the requirements of leading competitive shooters with a pull weight range of <4 oz to 32 oz.triggertech.com
I haven't really considered a 2 stage yet...
Any thoughts on this...I'm leaning towards Jewel as their reputation is quite good.
I've run Jewels on my rifles both guiding and hunting myself for more years than I can remember and never had a problem….and they Don't get any dirtier than DUSTY South Texas!Not Jewel. Trigger Tech hands down. I've run Jewel (hated it and IMO have no buisiness on field guns) , Timney, and the Trigger Tech Diamond as well as the Trigger Tech Special. TT are amazing triggers. Reliable, crisp and easy to adjust. I ran the Diamond on the comp rifle and my daughters rifle has the special. I don't like hair triggers so typically won't set them for anything less than 1.5lbs or so. The Diamond allows you to adjust down to 4oz I believe , which is ridiculous, but it it's a beautiful trigger and you can adjust them without pulling the action out of the stock. It's just 1 Allen screw.
Grab the Trigger Tech Special and don't look back.
I've had more than one smith offer to time a bighorn for me by simple filing the cocking piece. It's a shame.So far as timing your trigger goes, maintain about .240" of firing pin fall if you want top accuracy. I have done the bighorns, you have to re cut the cocking can helix angle in the bolt to time them and get enough pin fall. Without doing that they ended up about .200". Your better off with cock on close than weak ignition, going bang does not mean shooting optimally.
I have not owned a trigger tech, but have felt a lot of them in factory Christensen rifles and have not been impressed. Granted, they were factory set and had not been adjusted. Trigger Tech also made in Canada, if that matters to you. My first aftermarket trigger was a Jewell HVR set at 1 lb and I was very happy with it. Since then, I have bought several Timney triggers and have also been very happy with those. It's tough to beat a Timney Elite Hunter for the 700 action for a 1.5-2lb trigger for the money retail $149.99. I also have the Timney HIT trigger which is excellent and locks up like a fine swiss clock.I have a Big Horn Origin L/A on the way.....looking for a trigger.
Im looking for a trigger that adjusts safely from 0.5lb - 2.25 lbs. This is kind of a wish range. I think I would like 4-8 oz when shooting off the bench and about 1.75-2.25lb in the field. The point of this post is that there is more to a trigger than weight.
Weight is important, but I need the safety to be absolutely reliable. I also want a nice crisp short pull with very good resistance to jarring off. I get that super light triggers maybe more sensitive and that is ok as long as it is hunting safe at 1.5lb.
I have used Triggertech, Timney, Geisslle and Jard in the past. Timney for my Win 70 is so far my favorite overall.
I'm basically down to:
Remington 700 Special Trigger // TriggerTech
The Rem 700 Special is an upgraded version of our primary model which further enhances accuracy & precision on any right-handed Remington 700 model rifle.triggertech.com
Remington 700 Diamond Trigger // TriggerTech
The TriggerTech Diamond Rem 700 Trigger was designed to meet the requirements of leading competitive shooters with a pull weight range of <4 oz to 32 oz.triggertech.com
I haven't really considered a 2 stage yet...
Any thoughts on this...I'm leaning towards Jewel as their reputation is quite good.
+1 on the Timney Elite. Great trigger.I have not owned a trigger tech, but have felt a lot of them in factory Christensen rifles and have not been impressed. Granted, they were factory set and had not been adjusted. Trigger Tech also made in Canada, if that matters to you. My first aftermarket trigger was a Jewell HVR set at 1 lb and I was very happy with it. Since then, I have bought several Timney triggers and have also been very happy with those. It's tough to beat a Timney Elite Hunter for the 700 action for a 1.5-2lb trigger for the money retail $149.99. I also have the Timney HIT trigger which is excellent and locks up like a fine swiss clock.