DartonJager
Well-Known Member
- Joined
- Apr 1, 2016
- Messages
- 994
I just purchased a Bushnell DMRIIi 3.5-21x50mm G2 and are trying to buy a set of Burris XTR Sig scope rings but are clueless as to what is the minimum but correct height model to buy. They are offered in 1" andd 1.5" heights and would like to buy the rings that will keep my scope as low as possible.
I"m guessing here I'll need the 1.5" rings.
I will be mounting the scope on both a Savage 10FCP and a Tikka T3.
I am hoping there is some rule of thumb that based on your rifles degree of bolt throw and diameter of the front objective of your scope including adding the thickness of the flip up scope caps you can determine what height your scope rings need to be. Am I correct or is there some other source of information I must use?
Lastly is it best I wait until I have the scope to use to determine the scope rings I need?
Thanks,
Art
I"m guessing here I'll need the 1.5" rings.
I will be mounting the scope on both a Savage 10FCP and a Tikka T3.
I am hoping there is some rule of thumb that based on your rifles degree of bolt throw and diameter of the front objective of your scope including adding the thickness of the flip up scope caps you can determine what height your scope rings need to be. Am I correct or is there some other source of information I must use?
Lastly is it best I wait until I have the scope to use to determine the scope rings I need?
Thanks,
Art
Last edited: