ELR Researcher
Well-Known Member
- Joined
- Aug 11, 2009
- Messages
- 1,522
FOR SALE:
Barrel #1 (well under 100 rounds fired)
o Bartlein, 6.5mm (.264/.256), 5R, 1:8 twist, 1.450 straight cylinder, 32" finished, 416R SS
o Salt bath nitride (Isonite QPQ) barrel and brake; oxide blasted before coating for matte black finish (no finger prints); QPQ nitriding source - Joel Kendrick/MMI-Trutec
o Associated go and no-go gauges
o Chambered and fitted in custom 6.5mm-300 RSAUM Improved by Gary Ocock/GO Precision (pic at bottom); threaded 1.062x16, 1" deep, standard 60 degree thread angle.
Barrel #2
o Used, for fire-forming-only, SS; chambered and fitted in custom 6.5mm-300 RSAUM Improved by Gary Ocock (for fire-forming for use with barrel #1).
Muzzle brake – Vais SS, including R&R dowel, finished flush with barrel (Ocock); easily removable for transport.
Associated reloading and maintenance gear:
o Barrel stub with cut dummy chamber - to use as a bullet seating tool
o Bore guides - thru MTG, custom with solvent port
o RCBS shell holder
o Custom die set (micrometer sizer, micrometer seater, (9) bushings, expander) for custom 6.5mm-300 RSAUM Improved – by Neil Jones NOTE: A reloading press similar to the RCBS Rock Chucker Supreme (#09356) is required – to accept the 1-14 die body used for case forming/sizing (press includes a 7/8-14 insert for the seating die).
Brass - fire-formed Norma 300 RSAUM for custom 6.5mm-300 RSAUM Improved – 92
FIRM price for all the above EXCLUDING shipping (cost almost $1900 excluding multiple inbound/outbound shipping charges): $1250. [If you think the price is high, PLEASE take the time to price out the parts and labor, all top tier. I have receipts for everything.]
Logistics: Payment by personal check or money order; shipment made upon your check/MO clearing my bank.
Why am I selling? – for funds for the next project.
HG BR cartridge comparison - 6.5x47 Lapua and 6.5mm-300 RSAUM Improved
Barrel #1 (well under 100 rounds fired)
o Bartlein, 6.5mm (.264/.256), 5R, 1:8 twist, 1.450 straight cylinder, 32" finished, 416R SS
o Salt bath nitride (Isonite QPQ) barrel and brake; oxide blasted before coating for matte black finish (no finger prints); QPQ nitriding source - Joel Kendrick/MMI-Trutec
o Associated go and no-go gauges
o Chambered and fitted in custom 6.5mm-300 RSAUM Improved by Gary Ocock/GO Precision (pic at bottom); threaded 1.062x16, 1" deep, standard 60 degree thread angle.
Barrel #2
o Used, for fire-forming-only, SS; chambered and fitted in custom 6.5mm-300 RSAUM Improved by Gary Ocock (for fire-forming for use with barrel #1).
Muzzle brake – Vais SS, including R&R dowel, finished flush with barrel (Ocock); easily removable for transport.
Associated reloading and maintenance gear:
o Barrel stub with cut dummy chamber - to use as a bullet seating tool
o Bore guides - thru MTG, custom with solvent port
o RCBS shell holder
o Custom die set (micrometer sizer, micrometer seater, (9) bushings, expander) for custom 6.5mm-300 RSAUM Improved – by Neil Jones NOTE: A reloading press similar to the RCBS Rock Chucker Supreme (#09356) is required – to accept the 1-14 die body used for case forming/sizing (press includes a 7/8-14 insert for the seating die).
Brass - fire-formed Norma 300 RSAUM for custom 6.5mm-300 RSAUM Improved – 92
FIRM price for all the above EXCLUDING shipping (cost almost $1900 excluding multiple inbound/outbound shipping charges): $1250. [If you think the price is high, PLEASE take the time to price out the parts and labor, all top tier. I have receipts for everything.]
Logistics: Payment by personal check or money order; shipment made upon your check/MO clearing my bank.
Why am I selling? – for funds for the next project.
HG BR cartridge comparison - 6.5x47 Lapua and 6.5mm-300 RSAUM Improved