Recent content by sean1

  1. S

    Bullet seating depth question

    1:9 twist. Elevation would be 500-2500 feet probably. Live in the mid Atlantic region
  2. S

    Bullet seating depth question

    Thanks. I'm going to try and get this to where I can use the mag. For my purposes I would like to have it available. This will be a hunting rifle where I might be in a stand inside the woods or on the edge of a field set up. Kind of a do all gun if you will. I've only tried the one bullet so...
  3. S

    Bullet seating depth question

    Well, accuracy wasn't really the issue. Getting my cartridge to fit in the magazine was my issue. First attempt yielded .5" at 100. I think I have potential but need to find the best combination for my rifle and my needs
  4. S

    Bullet seating depth question

    Thank you. The other magazine well isn't an option because the action was cut for a detachable magazine. I think I will order a box of those bullets to try.
  5. S

    Bullet seating depth question

    I did .010, .040, .080 and .120 off the lands. I was unaware that you could find another node going deeper
  6. S

    Bullet seating depth question

    Problem is we did not realize the action I bought was set up for a box magazine. Live and learn.
  7. S

    Bullet seating depth question

    I had a 280 ackley built 700 action and brux barrel I started load development with Berger 168 vld's and h4350. Started with a mild load of 50gr of h4350 with that bullet. I did the Berger suggested test with the vlds. It seems to prefer around the .040 off the lands. However, this loaded...
  8. S

    Scope selection help

    Well. I made a decision right or maybe wrong. Did a lot of soul searching and figured I was over thinking this selection. I ordered a luepold vx3i 4.5-14 50mm, side focus, cds and 30mm tube. Scope comes with a free custom turret when I get things figured out. I've had good luck with luepold and...
  9. S

    Scope selection help

    Wow. You can't see that one at all
  10. S

    Scope selection help

    Does your reticle get too small at low power? The ffp scope I looked through (can't remember which one) , the reticle was very small at its lowest magnification especially for a low light situation
  11. S

    Scope selection help

    Would like to stay within $750-800. SFP as it will be used close up and long distance. I'm wanting to get custom turrets. MOA reticle as I will spend too much time thinking about mils compared to inches
  12. S

    Scope selection help

    I will check those out. Also should say I'm not wanting a really heavy scope either. However I see this nightforce is a little lighter that the other models.
  13. S

    Scope selection help

    I'm going to be getting a 280 ackley built very soon whenever the barrel shows up. Boyd's laminate stock ( heritage) 700 action 24" no5 contour fluted barrel Thinking it will be used realistically inside of 750 yards and occasionally have a little fun out to 1000 yards when I have the...
  14. S

    280AI build help!

    I think we are doing the same thing. I think I'm narrowing down want I want now. Rem 700 action trued 24" #5 contour fluted I was going to go with a synthetic stock but I have decided on a laminate Hoping to stay in the 9-9.5lb with scope
  15. S

    7mm/.284 ?

    280 Remington?
Top