Damascus
Well-Known Member
Been having trouble finding powder for my .308 match rifle, hoping someone might have some and be needing something that I do have;
I have new one-pound cans (sealed of course) of H-4895 (1x), H-4831SC (1x), and an H-110 (2x).
Powders that I am looking for are listed at bottom of post.
Also have several hundred 100 ct. boxes of:
CCI Small Rifle primers, Small rifle Magnum, Small pistol Magnum, large pistol magnum,
Federal Large pistol, small rifle, and some Winchester small rifle.
I also have once-fired brass available in .223 Rem, .30-06, .32 S&W, .44 Spl, .44 Mag, .45 LC, .45 Schofeld, 7x57, .38 Spl, .38 Spl +P, .357 Mag, .45 ACP, .380 ACP, 9mm, and a few others. All brass is Remington, Winchester, or Federal headstamped and sorted, not mixed. Once fired, clean and bright.
Also have a new die set, Lee Deluxe in .270 Win (full length, neck sizer, seater), and a used RCBS 2 die set in .223 Rem (full length and sizer). Also a new Lyman Carbide neck sizer die for .308 Win.
I am interested in .308 168gr, 175gr, and 180gr. bullets, large rifle primers (regular or match), brass, and the following powders: H-Varget, H-4320, H-380, RL-15, RL-17, N150/550, IMR-4064, AA-2520, AA-4064. (powders in italics are my preferred choices).
If you can help, please PM me or e-mail me at [email protected]. Thanks
I have new one-pound cans (sealed of course) of H-4895 (1x), H-4831SC (1x), and an H-110 (2x).
Powders that I am looking for are listed at bottom of post.
Also have several hundred 100 ct. boxes of:
CCI Small Rifle primers, Small rifle Magnum, Small pistol Magnum, large pistol magnum,
Federal Large pistol, small rifle, and some Winchester small rifle.
I also have once-fired brass available in .223 Rem, .30-06, .32 S&W, .44 Spl, .44 Mag, .45 LC, .45 Schofeld, 7x57, .38 Spl, .38 Spl +P, .357 Mag, .45 ACP, .380 ACP, 9mm, and a few others. All brass is Remington, Winchester, or Federal headstamped and sorted, not mixed. Once fired, clean and bright.
Also have a new die set, Lee Deluxe in .270 Win (full length, neck sizer, seater), and a used RCBS 2 die set in .223 Rem (full length and sizer). Also a new Lyman Carbide neck sizer die for .308 Win.
I am interested in .308 168gr, 175gr, and 180gr. bullets, large rifle primers (regular or match), brass, and the following powders: H-Varget, H-4320, H-380, RL-15, RL-17, N150/550, IMR-4064, AA-2520, AA-4064. (powders in italics are my preferred choices).
If you can help, please PM me or e-mail me at [email protected]. Thanks