SkiingGunMonkey
New Member
- Joined
- Feb 23, 2013
- Messages
- 3
I have a Remington 700 Stainless Steel, BDL, with a detachable magazine in .300 Weatherby for trade. It's in really great condition. The bolt had an issue with the extractor eating brass and I didn't like the design as it's very common to occur/reoccur in the magnum calibres. so I ordered a new bolt, but because I'm not very attentive I ordered a SA Magnum Face bolt..... so in order to get this fixed I had Kevin Cram of Montour County RIfles ( Montour County Rifles ) who does EXCELLENT work mill out and install a Sako Extractor on the bolt. He does many of these a year and is very highly regarded on the these forums a video of his work is seen here:
http://www.youtube.com/watch?feature=player_embedded&v=bXfBNO2fxfc
It's as smooth as butter and the extractor engagement is VERY nice and consistent and positive. No head spacing issues post bolt modification either.
I traded this from another forum member at njgunforums recently, but given that I have a very fancy new bolt I really want to use it so I was hoping that someone had a SA 300 WM or comparable model available and wanted to trade. I'm leaving the scope (Simmons M1047, older nicer quality model, but still a relatively cheap scope) and sling I got with it on board. Like I said I'd prefer a SA 300 WM, but I'm open to offers.
Picture (doesn't come with the bipod):
http://i.imgur.com/y1HfsWM.jpg
I don't have a picture of the bolt, but here's a good comparison:
http://accurateshoot...Blog/ocab01.jpg
People raise a concern over safety for these, but Kevin shot one till the bolt seized more than once and it was fine. He was okay with them and with the amount he does and how none ever came back I was more than satisfied.
This will come with 2 backs of ballistic tip factory Wetherby ammo as well ( really really nice stuff at almost 70 bucks a box at Cabelas)
If you REALLY just want to buy this I'm asking $700 flat for the whole package plus ammo, but i'd prefer to trade. I'm new to these forums, but I'm a very active member under the same nickname at njgunforums so please don't hesitate to throw me a PM and we can talk over the phone or online.
http://www.youtube.com/watch?feature=player_embedded&v=bXfBNO2fxfc
It's as smooth as butter and the extractor engagement is VERY nice and consistent and positive. No head spacing issues post bolt modification either.
I traded this from another forum member at njgunforums recently, but given that I have a very fancy new bolt I really want to use it so I was hoping that someone had a SA 300 WM or comparable model available and wanted to trade. I'm leaving the scope (Simmons M1047, older nicer quality model, but still a relatively cheap scope) and sling I got with it on board. Like I said I'd prefer a SA 300 WM, but I'm open to offers.
Picture (doesn't come with the bipod):
http://i.imgur.com/y1HfsWM.jpg
I don't have a picture of the bolt, but here's a good comparison:
http://accurateshoot...Blog/ocab01.jpg
People raise a concern over safety for these, but Kevin shot one till the bolt seized more than once and it was fine. He was okay with them and with the amount he does and how none ever came back I was more than satisfied.
This will come with 2 backs of ballistic tip factory Wetherby ammo as well ( really really nice stuff at almost 70 bucks a box at Cabelas)
If you REALLY just want to buy this I'm asking $700 flat for the whole package plus ammo, but i'd prefer to trade. I'm new to these forums, but I'm a very active member under the same nickname at njgunforums so please don't hesitate to throw me a PM and we can talk over the phone or online.
