RECEIVER: This is an A-2 steel, forged / heat treated body which has been checked and gauged after each machining operation ensuring precision with strict tolerances and ultimately, superb mating with attached parts and adherence to Engineer drawings.
BOLT: A-2 Steel, one piece bolt ,handle & knob with checkered flat on underside. The extractor is the traditional proven, claw type extractor. Bolt Head diameter is set for the .30-06 family of cartridges. (A2 Chromium/molybdenum/vanadium is tool steel).
RECEIVER SPECIAL FEATURES: Flats with threaded holes and dovetails, permit the use of a variety of rings and bases. This feature eliminates the need for screwed on bases. Each flat is predrilled and threaded for standard 6-48 screws in 2 places. Flat tops are parallel and at the same level. These Actions have been engineered from original FN Belgian blue prints.
TRIGGER MECHANISM: The trigger is fully adjustable for sear engagement, over travel, and creep. The trigger body is made of steel.
TRIGGER GUARD: This trigger guard is fully machined from a steel forging and has a hinged FN/ Ruger style floorplate and latch. Believe it or not, I priced a similar trigger guard at the Shotshow from a German supplier and they wanted $800 for the guard. The Action capacity is 5 rds. of .30-06 length ammo.
FINISH: These Actions and Guards are blued. Some have bright bolts.
RECEIVER THREADS: Threads are standard 1.10 x 12 TPI.
BOLT-SPECIAL FEATURES: Strength of the forged bolt exceeds that of bolts in normal production. The specially designed bolt sleeve is an FN type and incorporates a Winchester style side swing 3 position blocking safety. This type of safety allows the use of a single or double set trigger in complete safety and preventing a discharge. Currently a similar bolt sleeve sells for $150.00 separately.
