I ordered both of these at the beginning of the year hoping to have the gun up and running for this years hunts. One thing lead to another and the components took way longer than expected.
My intentions were to build a properly throated 7SAUM.
Without even building what I initially had in mind I lost interest in it. Too much time on the forums lead me to thinking that I need something bigger and badder.
That being said I am still up in the air about selling everything. This Defiance Deviant Hunter is by far the nicest, cleanest, smoothest, sexiest action that I have ever laid eyes on. It is a work of art.
I will be replacing it with a different one in a slightly different configuration.
*Trigger Not Included
Here are the details
Defiance Deviant Hunter
- XM Length
-Mag BF
-3.2" Inside Diameter Magazine
-Defiance BDL Floor Plate
-Deep Sprial Fluted Bolt
-Recessed Bolt Nose
-Tear Drop Handle
-Integral 20 MOA Rail
-Integral Recoil Lug
-Spring, Follower and Action Screws Included
Bolt and shroud have been Nitrided.
The Manners stock that I have ordered for it will be ready in the next few days. Here are the details:
Manners MCS-TA Stock
-Elite Tactical Shell
-Adjustable LRI Titanium Hardware for the cheekpiece.
-2 Front studs, 1 rear
-2 Flush Cups opposite side of bolt.
-Camo is Elite Tactical Midnight Molded
-1" Pachmayr Recoil Pad
-This stock according to Manners Spec sheet should come in at 2.75 Lbs. The MCS-T is one of their best stocks. It is very comfortable to shoot prone or standing. It is a great dual purpose long-range/hunting stock.
The camo is molded in to the stock. The Elite Tac Camo lets the carbon fiber show IMO its the nicest/cleanest pattern that is offered. I don't have the stock in hand, but will shortly. The picture that I will include is another stock that I own with the same camo.
$2450 Shipped and Insured.
Payment to be made by PayPal Gift, Standard PayPal (add 3%), check or money order. If you are in Wyo/Utah and would like to see it please do.
This is what I have into it minus my shipping costs. I will need to ship to an FFL so make sure that they will accept from an individual.
I would also be willing to let whoever purchases it use either my 7SAUM or 6.5 Gap 4s SAUM Reamer and gauges. PM me for reamer specs.
My intentions were to build a properly throated 7SAUM.
Without even building what I initially had in mind I lost interest in it. Too much time on the forums lead me to thinking that I need something bigger and badder.
That being said I am still up in the air about selling everything. This Defiance Deviant Hunter is by far the nicest, cleanest, smoothest, sexiest action that I have ever laid eyes on. It is a work of art.
I will be replacing it with a different one in a slightly different configuration.
*Trigger Not Included
Here are the details
Defiance Deviant Hunter
- XM Length
-Mag BF
-3.2" Inside Diameter Magazine
-Defiance BDL Floor Plate
-Deep Sprial Fluted Bolt
-Recessed Bolt Nose
-Tear Drop Handle
-Integral 20 MOA Rail
-Integral Recoil Lug
-Spring, Follower and Action Screws Included
Bolt and shroud have been Nitrided.
The Manners stock that I have ordered for it will be ready in the next few days. Here are the details:
Manners MCS-TA Stock
-Elite Tactical Shell
-Adjustable LRI Titanium Hardware for the cheekpiece.
-2 Front studs, 1 rear
-2 Flush Cups opposite side of bolt.
-Camo is Elite Tactical Midnight Molded
-1" Pachmayr Recoil Pad
-This stock according to Manners Spec sheet should come in at 2.75 Lbs. The MCS-T is one of their best stocks. It is very comfortable to shoot prone or standing. It is a great dual purpose long-range/hunting stock.
The camo is molded in to the stock. The Elite Tac Camo lets the carbon fiber show IMO its the nicest/cleanest pattern that is offered. I don't have the stock in hand, but will shortly. The picture that I will include is another stock that I own with the same camo.
$2450 Shipped and Insured.
Payment to be made by PayPal Gift, Standard PayPal (add 3%), check or money order. If you are in Wyo/Utah and would like to see it please do.
This is what I have into it minus my shipping costs. I will need to ship to an FFL so make sure that they will accept from an individual.
I would also be willing to let whoever purchases it use either my 7SAUM or 6.5 Gap 4s SAUM Reamer and gauges. PM me for reamer specs.
