sable tireur
Well-Known Member
- Joined
- Oct 8, 2010
- Messages
- 3,872
I am trying to find a .22 PPC (Norma) finish reamer for a small project.
It can be new, or slightly used, 1 or 2 chambers at the most.
High Speed Steel or Carbide.
The throat needs to accommodate 45 - 55 grain bullets for varmint hunting. I do not need a longer throat.
I prefer a PTG bushing reamer but I will consider others. No solid pilots.
The reamer needs to be a 'no turn' neck. No tight chamber/tight neck please.
A 'Go-Gauge' would be nice but not insurmountable.
I will pay by USPS money order. No PP.
Any questions or suggestions will be answered an appreciated.
Thanks!
It can be new, or slightly used, 1 or 2 chambers at the most.
High Speed Steel or Carbide.
The throat needs to accommodate 45 - 55 grain bullets for varmint hunting. I do not need a longer throat.
I prefer a PTG bushing reamer but I will consider others. No solid pilots.
The reamer needs to be a 'no turn' neck. No tight chamber/tight neck please.
A 'Go-Gauge' would be nice but not insurmountable.
I will pay by USPS money order. No PP.
Any questions or suggestions will be answered an appreciated.
Thanks!
