Which alliant powder for creedmor

[DXHI]

wanting a temp stable powder for my creedmor..
Can hardly find Hodgson around here and I'm tired if the indefinite backorders on their stuff ...

Which powder should I go with?
Shooting 121 hammers

 

[Rhovee]

RL 16. Very close to H4350.

 

[wbm]

_.

 

[JMW67]

wanting a temp stable powder for my creedmor..
Can hardly find Hodgson around here and I'm tired if the indefinite backorders on their stuff ...

Which powder should I go with?
Shooting 121 hammers

rl 15, 16 or 17, 16 has worked the best for me had good luck with h-4895 with 120gr bullets also and normally easier to find

 

[Len Backus]

This belongs in RELOADING forum.

MOVED.

 

[DXHI]

This belongs in RELOADING forum.

MOVED.
Sorry. Thanks for getting it where it needs to be

 

[Creedmoor shooter]

Rl-16 is your huckleberry. It's my new favorite in the creed

 

[YZ-80]

I have good luck with RL-15 in my 22" Creedmoore. But hey, as Michael Keyton would say: "Yeah, Reloader 15, Reloader 16, whatever it takes"

 

[Flare]

I have good luck with RL-15 in my 22" Creedmoore. But hey, as Michael Keyton would say: "Yeah, Reloader 15, Reloader 16, whatever it takes"

What kind of velocities are you seeing in your22" creedmoor and what grain bullet?

corey

 

[SammySTW]

I'm shooting 140 Bergers at 2875 with RL16 in a 22" barrel

I hear that RL26 works well with the CM too, but that stuff is like gold dust and I save mine for other guns

 

[Jud96]

RL16, RL23, or RL26

 

[Flare]

I have RL 26 and I'm getting great velocity but I can't get the powder to be accurate I'm not sold on it

Corey

 

[Jud96]

I have RL 26 and I'm getting great velocity but I can't get the powder to be accurate I'm not sold on it

Corey

Have you adjusted seating depth? What bullet, brass, and charge weights have you tried?

 

[YZ-80]

What kind of velocities are you seeing in your22" creedmoor and what grain bullet?

corey

Hi Flare,

I've never put the Magnetospeed on it. I just shot for group size because I don't plan on using it out past 225 yards. That's as far as I can shoot in my back yard! Anyway, I run a 130 Accubond in it .020" off with 36.8 grains of RL-15. Its a puppy load. Published data says you can run it up to 39 grains but I got .375 MOA out of it at the lower charge and fast kills out to 225, so I figure why beat my stuff up? Anyway, now I'm curious so next range trip I'll see how fast they are going. My guess would be low 2600's.