VihtaVuori N568

Short Case

Well-Known Member
Joined
Oct 10, 2012
Messages
686
Has any one used the new VihtaVuior N568 yet? Is it as dirty as the N570, does it meter as will as the N565

Thanks
Don
 
It's slow. Not a super speed Demond like N570. Would work well in over bore. Like the Noslers. Rums. Etc.
 
I'd say it meters similar to H1000.

I messed around with it in my 300 Win. 230 OTMs. Tested H1000 the same day. It takes more grains of N568 to get the same velocity as H1000. I don't think I could get any more powder (N568) in the case and no pressure signs. Pretty compressed loads.

Hype was that N568 was a short cut N570 but from everything I'm seeing and reading, N570 produces higher velocities.

Both powders seemed to have an accuracy node at the same FPS. More testing is needed but I'm currently leaning toward running with the N568.

No input on dirty burning or not.
 
Thanks for the information, I have try the N570 and it has a lot of carbon build up.
I bought some N568 but have not had the time to try it yet. The N570 took a lot longer
to clean the barrel.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top