Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
turning necks on weatherby brass
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="antelopedundee" data-source="post: 1656602" data-attributes="member: 107384"><p>Is there a minimum desirable neck thickness? I set my cutter using a feeler gauge so that neck thickness was about .012. On some cases like PPU/Priv Partizan very little metal was removed at that setting. Others like Nosler, Norma Quality Cartridge had more removed. 6.5mm cases were expanded using a .263 carbide expander. The .262 turner mandrel was still a tight fit with Nosler and Norma brass. A breeze with the Quality Cartridge and PPU brass.</p></blockquote><p></p>
[QUOTE="antelopedundee, post: 1656602, member: 107384"] Is there a minimum desirable neck thickness? I set my cutter using a feeler gauge so that neck thickness was about .012. On some cases like PPU/Priv Partizan very little metal was removed at that setting. Others like Nosler, Norma Quality Cartridge had more removed. 6.5mm cases were expanded using a .263 carbide expander. The .262 turner mandrel was still a tight fit with Nosler and Norma brass. A breeze with the Quality Cartridge and PPU brass. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
turning necks on weatherby brass
Top