TL3 7Saum Barrel, Brake, Brass, Dies, Mag, and Bullets

[SealT5]

I'm no longer going to be using this barrel. It is brand new never threaded or fired. Chambered for a Bighorn TL3 with Barloc. It has the spacer to replace the barloc so this will fit any TL3/SR3 or Origin with proper lug. I will not separate any components until the barrel is bought.

$850 Shipped For EVERYTHING

NEW 22" Brux #5 1/9tw 5/8x24"

NEW Wilson Die Set w/ .310 bushing

NEW ADG 7Saum Brass 50ct. Neck turned to .015" for .004" neck clearance on chamber.

USED Area419 Hellfire 7mm/30cal 5/8x24 adapter.

NEW Accurate WSM 3rd Mag

NEW Giraud Pilot & Cutter

 

[SealT5]

Bump. Very motivated

 

[SealT5]

Bump. $350 for the barrel only

 

[SealT5]

Bump

 

[SealT5]

Bump. Still motivated to make a deal for someone!

 

[SealT5]

$850 Shipped

 

[codym]

What's the barrel weigh? I'm confused on the spacer. Will this require a barrel nut? I was under the impression that shouldered prefits weren't interchangeable between origins and TL3's

 

[SealT5]

@codym i will weigh the barrel tonight. I believe it's slightly under 3lbs.

The spacer replaces the ARC Barloc system. This is a shouldered barrel that will work with any TL3/SR3 action. No barrel nut required.

Bighorn origin actions share the same thread pitch as the TL3/SR3. You can purchase a recoil lug from Hunts Long Range to be able to use TL3 barrels on the origin. The link is below. Hope this helps


https://huntslongrange.com/product/hlr-origin-0-150-thick-recoil-lug/?v=7516fd43adaa

 

[codym]

Makes perfect sense, thank you. If this is around after the holidays I will be in touch.

 

[SealT5]

Bump