Danehunter
Well-Known Member
Last week I was camped at 9,500 ft. in the nearby Spring Mountains north of the Las Vegas valley. As I was laying down for an afternoon siesta after an arduous hike up I noticed a pinhead size hole beside the only floor seam in my solo Moment DW tent.
Today that entire seam gets re-sealed with Seam Grip for silnylon cloth. Tomorrow the entire outside of the floor gets coated with a mix of 5 parts odorless mineral spirits to 1 part GE Clear Silicone Caulk. The measurements are by volume. PM me if you need to know how to do this for silnylon tents B/C it is a 3 step process.
All this is to say that we need to have all our gear checked , repaired and ready for the fall hunts. The time to do it is now, just as it is time to practice at the range with our hunting rifles.
Eric B.
Today that entire seam gets re-sealed with Seam Grip for silnylon cloth. Tomorrow the entire outside of the floor gets coated with a mix of 5 parts odorless mineral spirits to 1 part GE Clear Silicone Caulk. The measurements are by volume. PM me if you need to know how to do this for silnylon tents B/C it is a 3 step process.
All this is to say that we need to have all our gear checked , repaired and ready for the fall hunts. The time to do it is now, just as it is time to practice at the range with our hunting rifles.
Eric B.
Last edited:
