I have a Hardy, carbon wrapped pre-fit barrel for a Tikka T3 chambered in 7mm WSM for sale with brass and dies.
These barrels are manufactured in New Zealand and are as good as the best as far as carbon wrapped cut-rifled barrels go.
This barrel is finished at 24", 1-8 twist, threaded 5/8x24. It has 150 rounds down the tube and has been extremely accurate out past 1200 yards giving consistent 1/2 moa accuracy. It is throated long. I have been shooting 180 ELD M bullets and COAL is 3.160" which is .02" off the lands. So best in a long action.
It will come with 150 pieces of NIB Winchester 7mm WSM brass, 50 pieces of once fired Winchester brass, and 49 pieces of 2x fired Winchester brass.
I will also include a Redding FL neck sizing die. There will not be a bushing included with the die.
Everything including barrel, brass, and die for $650 shipped.
These barrels are manufactured in New Zealand and are as good as the best as far as carbon wrapped cut-rifled barrels go.
This barrel is finished at 24", 1-8 twist, threaded 5/8x24. It has 150 rounds down the tube and has been extremely accurate out past 1200 yards giving consistent 1/2 moa accuracy. It is throated long. I have been shooting 180 ELD M bullets and COAL is 3.160" which is .02" off the lands. So best in a long action.
It will come with 150 pieces of NIB Winchester 7mm WSM brass, 50 pieces of once fired Winchester brass, and 49 pieces of 2x fired Winchester brass.
I will also include a Redding FL neck sizing die. There will not be a bushing included with the die.
Everything including barrel, brass, and die for $650 shipped.
