• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

Stocks and barrel

screech

Well-Known Member
Joined
Nov 26, 2005
Messages
1,271
Location
Riggins Idaho
Boyd's walnut long action a bolt stock
100+shipping

Shilen #1 stainless steel 7mm 9 twist
210+shipping

Take off Remington factory 700LA stock 25$+shipping
 

Attachments

  • DB01982C-45A5-4B18-929D-0ED969D4A4CF.jpeg
    DB01982C-45A5-4B18-929D-0ED969D4A4CF.jpeg
    1 MB · Views: 119
  • 452DFB9E-ABC5-4843-AA12-D571B1D145B2.jpeg
    452DFB9E-ABC5-4843-AA12-D571B1D145B2.jpeg
    2.1 MB · Views: 117
  • 3062DB95-2156-4228-929C-FF4F4AC60AA4.jpeg
    3062DB95-2156-4228-929C-FF4F4AC60AA4.jpeg
    1.1 MB · Views: 104
  • CC2DD904-A1E4-4834-AFE6-90F4B837E94C.jpeg
    CC2DD904-A1E4-4834-AFE6-90F4B837E94C.jpeg
    886.8 KB · Views: 117
  • 0FDE1CCA-2EB9-4113-B4E3-A6BED9B47840.jpeg
    0FDE1CCA-2EB9-4113-B4E3-A6BED9B47840.jpeg
    1.2 MB · Views: 106
  • E1D671B9-16B8-49AF-A18E-486ECF7BFA77.jpeg
    E1D671B9-16B8-49AF-A18E-486ECF7BFA77.jpeg
    1.1 MB · Views: 98
Last edited:
22" as it sits. On a number #1 contour you don't have to cut the inch off the muzzle because it has already been cut short from lapping it from a blank. The ends of a barrel will bell out from lapping but on the chamber side your chamber will cut the bell out and the crown side has already had the bell cut off because it has been cut down to 22" for contour. It would have been lapped while it was still in a blank form before contour at the 28". All in all it will finish right around 21.5 to 21.75 inches. If you would like you can call shilen to confirm. With that being said the chamber side will cut out just fine as long as the chamber isn't something super short like a 7br. If it was a 7br I would probably cut a half inch off the back but anything like a 7-08 or longer will be fine
 

Recent Posts

Top