Wish I didn't have to sell but financial responsibilities.....
McMillan Game-scout stock with edge fill (27.5 oz after glass bed job)
Tikka Stainless action with bolt (27 oz before bolt fluting)
Seekins Brake (3.5oz)
HCA Carbon barrel 26'' (49.1 oz)
Trigger/Action screw (3.1 oz)
Tikka bottom metal (2.6oz)
20 MOA rail (1.9oz).
This was built by Mike at Hells Canyon Armory. Trigger adjusted to 15oz. Oversized bolt knob and metal shroud. Kydex Cheek riser from Defensive Edge. Fluted bolt by LRI. Stock hydro dipped Kryptek and bolt cerakoted.
Also have Nightforce rings and NXS 5-22x Npr-1 scope. Redding competition die set and micrometer seating die. Couple boxes of Hornady and Berger bullets and some lapua brass.
Load recipe for below target: 58 grains 4831SC, Fed large rifle magnum primers. 2.660" COAL measured from bullet ogive. Average speed with 140 VLD's is 3125 fps.
SOLD
McMillan Game-scout stock with edge fill (27.5 oz after glass bed job)
Tikka Stainless action with bolt (27 oz before bolt fluting)
Seekins Brake (3.5oz)
HCA Carbon barrel 26'' (49.1 oz)
Trigger/Action screw (3.1 oz)
Tikka bottom metal (2.6oz)
20 MOA rail (1.9oz).
This was built by Mike at Hells Canyon Armory. Trigger adjusted to 15oz. Oversized bolt knob and metal shroud. Kydex Cheek riser from Defensive Edge. Fluted bolt by LRI. Stock hydro dipped Kryptek and bolt cerakoted.
Also have Nightforce rings and NXS 5-22x Npr-1 scope. Redding competition die set and micrometer seating die. Couple boxes of Hornady and Berger bullets and some lapua brass.
Load recipe for below target: 58 grains 4831SC, Fed large rifle magnum primers. 2.660" COAL measured from bullet ogive. Average speed with 140 VLD's is 3125 fps.
SOLD
Last edited:
