• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED **SOLD**6.5x284 1000yd Bench Rest Rifle

rangertmldr

Well-Known Member
Joined
Jan 28, 2005
Messages
179
Location
San Antonio Texas
###TRADE PENDING###
1). Rem 700 Long Action Trued, Sako Extractor, PierceIsion Firing Pin Assembly, Ejector disabled, bushed down firing pin (to prevent primer piercing) -smithed by Richard Franklin (Franklin Custom Rifles)
2). Action is pillar bedded to a custom Richard Franklin Model 008 F-Class and layered with 9 coats of clear coat
3). 1-Pc. Ken Farrell tapered 20+MOA
4). Barrel; Lilja 1.250" straight no taper, 30.50" in length (plenty of barrel length left to set back when the time comes), chambered in 6.5/284 by Mickey Colemen of Colemen Rifles - also a top smith w/ reputation as one of the best chamberers in the industry - barrel has 351 documented rounds down the tube
5). BR Jewell Trigger - currently set at 2 oz pull almost no travel (you breath on it it'll pop)
6). Dies - Redding Body Die; LE Wilson Neck Sizer and Bullet Seater (if you are not familiar with LE Wilson's - you will need an Arbor Press to use them - but they are the Cadillac of dies), Forster Shoulder Bump die
7). 100 pieces new lapua brass. 100 lapua 139 gr bullets
No Scope or rings included.
$2000 OBO all trades considered
65MMX284.jpg

F-Class004.jpg

F-Class005.jpg
 
Last edited:
Re: 6.5x284 1000yd Bench Rest Rifle

Twist rate? 1-8, 1-8.5, 1-9
Also would you have pics of targets out 600yds with this rifle?

Is it a tight-neck?

What is the round count?
 
Re: 6.5x284 1000yd Bench Rest Rifle

No turn neck, 1:8 twist, 351 rds fired through this barrel. No targets, but would be happy to shoot some for you and post pics.
 
Top