I've got a 2.865" length magazine restriction that I can't go Wyatt's with and want an sst just because. So I originally was dead set on the 7mm sst but I'm currently at five 7mm rifles. I already have a 25 cal, so now I'm tossing around 6mm sst or just go with a 7mm sst. A purpose driven need is not a goal or really a justification for this rifle. I've got all the parts laying around except the barrel so I'm not trying to fill a niche of any sort. I have a 6.5 saum so I don't want to go 6.5.
Can anyone tell me if the ADG Sherman SST brass in 7mm or 6mm needs neck turning?
I know the cartridges lend themselves to be non finicky and should yield wide nodes. I would guess that both will be non finicky but I would like the easiest tuning one of the two. My guess would be the 7mm sst. Suggestions ????
Can anyone tell me if the ADG Sherman SST brass in 7mm or 6mm needs neck turning?
I know the cartridges lend themselves to be non finicky and should yield wide nodes. I would guess that both will be non finicky but I would like the easiest tuning one of the two. My guess would be the 7mm sst. Suggestions ????
Last edited:
