mightyman
Well-Known Member
How on earth would u check that. Different size rings?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Scope sight in issues? Suggestions?
- Thread starter mightyman
- Start date
Help Support Long Range Hunting Forum
D
Deleted member 103481
Guest
To clarify your scope reticle is looking into the ground and won't come up to target or your bullet is going into the ground and won't come up to target?
mightyman
Well-Known Member
The crosshairs are 2ft below center target and won't adjust up.
It's a 5 foot target mount so, not looking in ground but won't adjust north to center off target.
down fine... L&R fine... bullet must be gong in dirt under target...
It's a 5 foot target mount so, not looking in ground but won't adjust north to center off target.
down fine... L&R fine... bullet must be gong in dirt under target...
mightyman
Well-Known Member
Bolt out... looking through barrel and bore on target... crosshairs 2 ft below and won't adjust north
Ckgworks
Well-Known Member
When bore sighting.... move it the opposite way you want...Or rather where your crosshair is pointed. I think you want to try click down.
Last edited:
Rick Richard
Well-Known Member
Yep. Measure each ring from the base at where it sits on the rail and where the bottom of the scope sits in the ring (thickness). Believe me it is possible to do.
Ckgworks
Well-Known Member
If you lifted the cross hair to target....your barrel goes up, shooting way over the target.
mightyman
Well-Known Member
Ok thanks for the help and suggestions... will give it a try another day... never had this issue before... always professionally mount, hit range.. bore sight , dial in, shoot and go...
The dial just won't go north... new scope, and 6 clicks or so north it stopped..down is fine...windage is fine..
But will recheck everything, inc measuring rings..
Thanks for the help guys..something else comes to u.. let me know.
Mightyman
The dial just won't go north... new scope, and 6 clicks or so north it stopped..down is fine...windage is fine..
But will recheck everything, inc measuring rings..
Thanks for the help guys..something else comes to u.. let me know.
Mightyman
Ckgworks
Well-Known Member
mightyman
Well-Known Member
Ckgworks
Thanks
Oh the days when I just used to mount, get some federal shells and Kmart rings..shoot and hit..
My son got me addicted to this stuff as he is a 600-1000 yard shooter..and now it's like putting a Webber grill together
Thanks
Oh the days when I just used to mount, get some federal shells and Kmart rings..shoot and hit..
My son got me addicted to this stuff as he is a 600-1000 yard shooter..and now it's like putting a Webber grill together
mightyman
Well-Known Member
Ckgworks...
So I may have had it... but backwards! Ok
Let me give it a shot next week.
Thanks for the drawing.. that helps a lot!
So I may have had it... but backwards! Ok
Let me give it a shot next week.
Thanks for the drawing.. that helps a lot!
Ckgworks
Well-Known Member
I hear you on the days of simplicity....
Been there myself a whole buncha times!
and only remember the solution half the time. Sometimes the solution is the simplest one, at least I hope it turns out to be that simple! Good luck!
Been there myself a whole buncha times!
and only remember the solution half the time. Sometimes the solution is the simplest one, at least I hope it turns out to be that simple! Good luck!
D
Deleted member 103481
Guest
I'm thinking/hoping this is going to be your problem. Which is very good, because that means it's a cheap fix!
mightyman
Well-Known Member
Yes I am also...and if it doesn't...and is the scope?
The Burris has a LT warranty...and I will send in..
If it's the rings..mount?easy fix, and I have spares.
If not..then I will get my son, who is an expert (so I've heard) to fix..(4hrs away though)
And if that don't work
I will use my 1977 Marlin 3030, open sites, and say the heck with it..
The Burris has a LT warranty...and I will send in..
If it's the rings..mount?easy fix, and I have spares.
If not..then I will get my son, who is an expert (so I've heard) to fix..(4hrs away though)
And if that don't work
I will use my 1977 Marlin 3030, open sites, and say the heck with it..
