scope out of line

[longrangebo]

I have a NXS 8-32 Nightforce an a 338-408 Has a 40 moa rail ! Had to zero at 600 because they only have 65 moa. I got to thinking I would like a bit less taper so II could zero 3-400 yds because I dont have a 600 yd range close. So I put a set of the burris Z rings on it with the 5moa. bushing. It is now 4.5 in. high at 100 and 5 in high at 400 good. However the windage is almost out of addjustment? has anyone else had an Issue like that with the z rings. Thanks

 

[Capt RB]

Move the ring inserts to compensate for the windage Front biased toward the correction rear opposite correction
For example if you need left correction go 10 oclock in the front and 4 oclock in the rear. You lose a touch of up correction but gain a bunch of windage to recenter the windage erector assembly in the turret. The directions that come with the rings should explain this with pictures

 

[longrangebo]

Move the ring inserts to compensate for the windage Front biased toward the correction rear opposite correction
For example if you need left correction go 10 oclock in the front and 4 oclock in the rear. You lose a touch of up correction but gain a bunch of windage to recenter the windage erector assembly in the turret. The directions that come with the rings should explain this with pictures

Thanks I understand that ,I was just wanting to find out if anyone else had that trouble, I still have 6 moa left so I will most likely let it be!

 

[Bravo 4]

Just my opinion...but I don't think I would let that one ride, especially on such a beast of a rifle. With the turret almost maxed out (in any direction) I think it can possibly degrade the performance, optically and mechanically.

 

[the hunter]

If it is the rings git rid of them.

 

[Capt RB]

Just my opinion...but I don't think I would let that one ride, especially on such a beast of a rifle. With the turret almost maxed out (in any direction) I think it can possibly degrade the performance, optically and mechanically.

+1. I use them on sub 30 cal standard cartridges. BignGreen has said that on braked 300 win mags they had slippage. Your well above that kind of performance