• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED Schmidt Bender Zenith 3-12x50 Illuminated FD7 w/ Elevation Dial

Spence1875

Well-Known Member
Joined
Jun 20, 2010
Messages
342
Location
Houston, Tx
II have bought and sold here with no issues. I prefer a check, I wait till clears, usually 2 or 3 days, but will take PP FF (or you cover the fees) or zelle.

Selling a 3-12x50 Schmidt and Bender Zenith 3-12x50 with the illuminated FD7 reticle (Like a 4A but with an illuminated dot in the middle - click the link at the top of the pics to see the reticle). The reticle is adjustable from the lowest of light to clearly visible in bright daylight. Glass is in 100% shape but scope body has ring marks both front and back of the adjustments, the ring marks are very light and will almost certainly be covered by your rings and the top cap of the elevation turret has some marks in the screwdriver slot, a new cap is $25 from SB. Elevation dial goes from 0 to 32. Scope is a 30mm tube and reticle is in the first focal plane. Adjustments are 1 cm at 100 yards (.1Mrad). Has the posicon windage and elevation adjustments and there is even a spare CR2032 battery in the windage adjustment cap. I have the see through scope covers for this one (not pictured) and comes in a S&B box, although it is not the original box for this scope. Asking $1550 shipped (these sell for $2350 new when you can find them plus the added $300 for the elevation dial). One of the best low light hunting scopes ever made.
 

Attachments

  • 210664.jpeg
    210664.jpeg
    52.6 KB · Views: 142
  • 210665.jpeg
    210665.jpeg
    46.9 KB · Views: 143
  • 210666.jpeg
    210666.jpeg
    50.4 KB · Views: 137
  • 210667.jpeg
    210667.jpeg
    47.2 KB · Views: 158
  • FB84D0E3-2CBD-4B23-8810-330E0FEC194F.jpeg
    FB84D0E3-2CBD-4B23-8810-330E0FEC194F.jpeg
    1 MB · Views: 142
  • C7D3B436-FF9F-41FF-989A-F85D2946724D.jpeg
    C7D3B436-FF9F-41FF-989A-F85D2946724D.jpeg
    1.7 MB · Views: 148
  • 845E53F9-AAB9-4824-845D-5B7C82D4FD44.jpeg
    845E53F9-AAB9-4824-845D-5B7C82D4FD44.jpeg
    1.7 MB · Views: 149
  • 8E23DA79-6468-484E-B05A-D91ECD6FFEF2.png
    8E23DA79-6468-484E-B05A-D91ECD6FFEF2.png
    65.1 KB · Views: 143
  • 1DA4AA12-3A9C-47DA-9696-F1DF89B89AAC.jpeg
    1DA4AA12-3A9C-47DA-9696-F1DF89B89AAC.jpeg
    1.3 MB · Views: 148
Last edited:
Had a few questions about the dial. It is a factory installed Schmidt Bender mil based turret with a zero stop. You can configured it to any caliber, load or sight in distance you like. Thanks. Spence
 
Last edited:
Top