Threaded for a Savage 110 LA action - large shank. No barrel nut!
Bartlein 338 cal 9.3 twist SS 1.350" breech with 4" cylinder, Sendero contour 30 inches.
Mac's gunworks muzzle break. Works great!
345 rounds. (lots of life left)
Shot 3 max round strings and then let it cool. It was used on my elk hunting rifle. I now have a suppressor now so I'm going to a shorter barrel length.
Chambering was done by a local guy here in MN who I can't name. He has build both my F-class rifles where I have achieved High master in Long range and Mid Range. He knows what he is doing.
Included:
338 lapua LE Wilson micrometer seating die
RCBS FL bushing die with bushing
Redding Decapping die
115 pieces of Lapua 3x fired brass. The brass has been cleaned, deprimed and annealed with my AMP. (needs resizing)
Will shot the berger 300 grain bullets at 2820 using H-1000 here in MN. It will shoot ½ moa or better all day long if I do my part. Pictures are at 100, 600 and 800 yards. I will provide load data to buyer.
To get this set up new would run a min of $1200
$675 for everything shipped in US. ($400 for just the barrel & break). The barrel must sell before any components will be sold separately
I'll take paypal friend or venmo. Listed on other sites. First all take it followed by a PM gets it.
Thanks for looking and let me know if you have any questions.
Jeff
Bartlein 338 cal 9.3 twist SS 1.350" breech with 4" cylinder, Sendero contour 30 inches.
Mac's gunworks muzzle break. Works great!
345 rounds. (lots of life left)
Shot 3 max round strings and then let it cool. It was used on my elk hunting rifle. I now have a suppressor now so I'm going to a shorter barrel length.
Chambering was done by a local guy here in MN who I can't name. He has build both my F-class rifles where I have achieved High master in Long range and Mid Range. He knows what he is doing.
Included:
338 lapua LE Wilson micrometer seating die
RCBS FL bushing die with bushing
Redding Decapping die
115 pieces of Lapua 3x fired brass. The brass has been cleaned, deprimed and annealed with my AMP. (needs resizing)
Will shot the berger 300 grain bullets at 2820 using H-1000 here in MN. It will shoot ½ moa or better all day long if I do my part. Pictures are at 100, 600 and 800 yards. I will provide load data to buyer.
To get this set up new would run a min of $1200
$675 for everything shipped in US. ($400 for just the barrel & break). The barrel must sell before any components will be sold separately
I'll take paypal friend or venmo. Listed on other sites. First all take it followed by a PM gets it.
Thanks for looking and let me know if you have any questions.
Jeff
