nal3470
Well-Known Member
- Joined
- Dec 20, 2014
- Messages
- 914
Selling my pristine Piercision 300nmi don't have time to fireform an reload like I used to so letting this one go it's Ryan's standard build
Total build was over $6300
Has 100 lapua brass
Been fired around 50 times mostly factory ammo attached is fireforming group and a group with factory Berger 215 loads
$5500 as pkg with nxs dies and box of factory ammo an brass
$4300 minus scope
Kelbly Atlas Lapua Bolt Face | 1100 |
Manners EH1 LA BDL 3 studs scorched camo | 600 |
Proof Research Sendero Contour 26" 30 cal 9.0 tw | 730 |
Titanium Self Timing 5 port 3/4x24 | 240 |
Hawkins M5 BDL bottom metal | 180 |
Wyatts CFE-12 Wyatts CFE -12 | 65 |
Rem 700 Mag Spring Rem 700 Mag Spring | 15 |
Hawkins Action Screws | 15 |
Trigger Tech Special | 185 |
Bullet Central 300 NMI sizing die | 270 |
Hornady 300 norma improved seating dies | 100 |
Lapua Hydro Formed Brass | 280 |
Atlas Rail (there is no Atlas Rail on this rifle. I don't think I purchased this) | 40 |
Bore Guide Custom Bore Guide | 50 |
Labor Assemble in 300 norma improved. Everything for labor | 1950 |
Labor Shipping | 100 |
Labor CC Fee | 150 |
Nightforce Ultralight 30mm 6 screw | 190 |
Nightforce 30mm level cap | 80 |
Total build was over $6300
Has 100 lapua brass
Been fired around 50 times mostly factory ammo attached is fireforming group and a group with factory Berger 215 loads
$5500 as pkg with nxs dies and box of factory ammo an brass
$4300 minus scope
Attachments
-
IMG_1918.jpeg185.8 KB · Views: 197
-
IMG_1919.jpeg196.3 KB · Views: 212
-
IMG_1921.jpeg283.7 KB · Views: 214
-
IMG_1922.jpeg236 KB · Views: 219
-
IMG_1923.jpeg231.4 KB · Views: 202
-
IMG_1924.jpeg229.1 KB · Views: 207
-
IMG_1914.jpeg372.3 KB · Views: 210
-
IMG_1915.jpeg189 KB · Views: 195
-
IMG_1916.jpeg178.1 KB · Views: 177
-
IMG_1917.jpeg208.6 KB · Views: 189