• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED Remington 700 S/A Bolt, Std Boltface

tobnpr

Well-Known Member
Joined
May 30, 2013
Messages
793
New, unfired. This was part of a factory new M700 complete receiver/bolt for a customer's .260 build.
I had trued the receiver and bolt- bolt lugs were faced on the lathe and finish lapped to the receiver abutments. I was about to spin up the barrel when the customer called and said he wanted to change and go with a .300 WSM instead of the .260 (yeah, he also had to pay for opening the feed rails and end of the mag cutout for an extended Wyatt's mag...)

I recommended hego with a custom dia. PTG bolt body/M16 extractor and new timed handle instead of messing with converting factory bolt.

I had purchased a new Gre-Tan ejector to replace the one I swapped over and was about to order a new firing pin assembly as well, but figured someone out there might not need the fp assembly (easily obtained for about 75 bucks) so selling without the fp assembly.

Some of the blueing is worn off the bolt body from the lapping process- again, bolt is new and unfired. If you like, I'll cold-blue or Cerakote in black at no additional cost.

$160 includes USPS Priority shipping. First "I'll take it" PM, pmt via Zelle.


Remington 700 Bolt.jpg
 
Top