• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

Remington 700 223AI

backwoods83

Well-Known Member
Joined
Jan 8, 2011
Messages
3,491
Remington 700 223 sps tactical action, with Badger knob and 45moa base. Timney Calvin Elite trigger.
Stockys LRC vertical grip, original, not carbon fiber. In kryptik highlander, with Wyatts M4 bottom metal and 2 10rnd magazines.
Bartlein 28" fluted 8 twist varmint contour, chambered in 223 Ackley, less than 300 rounds fired.
Looking for $1250 for an awesome trainer rig.
 

Attachments

  • 20230714_181526.jpg
    20230714_181526.jpg
    114.2 KB · Views: 277
What's the maximum COAL for magazine operation?
 
Didn't save any targets from that one, I don't believe, I'd have to check. The load was 75grn ELDMs touching the lands, in fireformed LC brass, 29.6grns of PP2000MR, and CCI 450s. It averaged 3220fps and hovered around 3/8". Good for steel out to 1100yrds. Topped out over 3300 with 30.7grns, not because of excessive pressure or damaging brass, but because the firing pin hasn't been bushed, and it was starting to crater pretty bad. You could probably catch one node higher, if the bolt was bushed. There's still 3/8" of room in the mags, with the load I used. Only selling because I'm putting a 7 twist throated for 85.5s on an Origin.
 
Thanks for the information, that's moving pretty quick for that 75gr bullet. I'm running a 26" 7 twist with the 85gr Berger @ 2900-2950 depending on which powder I use (Varget or RL-17)? Those are great bullets for steel or hunting. I built my rifle off a Ruger American action and running it as a single shot with 2.622 COAL. Have taken it to 1769yrds. Looking at adding another one to my stable so I can have family compete side by side with similar ballistics. I am very tempted with your set up.
 
Have you tried the 85gr Berger out of this barrel?
 
It definitely has the room in the magazines. It needs about .050 more freebore for the 85.5s, but using PP2000MR or RL17, and running them over 3k, they should shoot fine in a 8 twist, but I don't know, I haven't tried them.
 
More pictures.
 

Attachments

  • 20231201_130619.jpg
    20231201_130619.jpg
    125.1 KB · Views: 196
  • 20231201_130653.jpg
    20231201_130653.jpg
    301.7 KB · Views: 194
  • 20231201_130706.jpg
    20231201_130706.jpg
    84.4 KB · Views: 202
  • 20231201_130746.jpg
    20231201_130746.jpg
    112.2 KB · Views: 199
  • 20231201_130757.jpg
    20231201_130757.jpg
    149 KB · Views: 194
  • 20231201_130848.jpg
    20231201_130848.jpg
    130 KB · Views: 183
  • 20231201_130858.jpg
    20231201_130858.jpg
    140.4 KB · Views: 176
  • 20231201_130912.jpg
    20231201_130912.jpg
    239.5 KB · Views: 189
Top