Remington 5R 308 - gen 1 - customized

[cb4128]

I have what started out as a Remington 5r 308 with 20" barrel. I had the barrel cut down to 16" and threaded, re-crowned; sent the bolt off to LRI to have them flute it and install a bolt knob, then installed a triggertech special in it and dropped it into an MPA lite chassis.

This is the most accurate gun I've ever shot, my best group is literally 1 hole at 100 yards. This was with 168gr amax match Hornady ammo. I don't ever shoot it and the chassis while cool, isn't my personal favorite setup. I hunt 90% of the time so I prefer my hunting setups.

I will sell it 1 of 2 ways:
- the barreled action for $900 with the trigger
- in the MPA lite chassis, no muzzle device, no mag - $1,550

Pics to follow of group and current setup.

 

[Jrin21]

Pic

 

[cb4128]

Pics

 

[cb4128]

Pics of my best group with this gun in a slightly different setup

 

[cb4128]

Ttt

 

[cb4128]

Ttt

 

[cb4128]

any interest here?

 

[ButtersDad]

Yup, Could you get weights of the bare barreled action with trigger and with the bare chassis? I'm looking for a lighter weight short bolt action for a surpressor set up. Thanks

 

[cb4128]

sure I can do that tonight...

 

[cb4128]

Going to hang onto the chassis - will still sell the barreled action though.

Asking $900 for the barreled action, 8x40 screw 20 moa talley Scope base and triggertech special trigger.

 

[ButtersDad]

have you had a chance to weigh the barreled action?

 

[cb4128]

5lbs even for barreled action as is - will be a few ounces less when I take the aac brake off