Reloading 7WSM

[jcann]

Currently I'm having a rifle built by G.A. Precision in 7WSM. It's being throated for the 168/180gr. VLD. I'm having trouble finding load data for this round.

If anyone is shooting this round and would like to share their reloading data I would really appreciate it.

 

[DocGlenn]

I'm using 65gr of 4831sc and Win Mag primer w/ 168gr Bergers. Shoots around 2950 and works well in my rifle. Hope this helps!

Glenn

 

[larryaguilar]

I have a 7mm-300wsm. 180 vld 66.5 h1000 gets 2962 out of a 29" barrel

 

[larryaguilar]

Oh Yah, I use 210 primers not 215.

 

[Too Tall Rosenwald]

Winchester brass, Federal 210 primer, 180 Berger, 66 grains H-1000, .010 off the lands.

 

[Varmint Hunter]

Plenty of info here:

7mm Cartridge Guide within AccurateShooter.com

 

[jbroadnax]

I tried a bunch of powders in the 7wsm with 180's and has the best velocities and and accuracy with 57grs of IMR 4831.

 

[jcann]

Thanks everyone, I really appreciate the info. I assume all of you are doing all the necessary case prep on the Winchester brass.

 

[Skyking]

I have a 2 GAP 7wsms. Shoots the 180 Bergers .005-.010 into the lands 65g H1000 over CCI-BR2 primers.

 

[jcann]

What case prep do you do?

What is your COAL?

And do you know your muzzle velocity?

I would like to work some loads up before my rifle is finished.