Quickload Help please

Used 22 inch barrel as I wasnt sure what you were running


Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time
% % Grains fps ft.lbs psi psi % ms

-10.0 88 50.65 2691 2042 41123 12164 99.7 1.335
-09.0 89 51.21 2719 2085 42437 12260 99.8 1.320
-08.0 90 51.78 2747 2128 43794 12350 99.9 1.304
-07.0 91 52.34 2775 2172 45190 12433 100.0 1.289
-06.0 92 52.90 2803 2215 46624 12509 100.0 1.274
-05.0 93 53.47 2831 2260 48099 12580 100.0 1.259
-04.0 94 54.03 2858 2304 49614 12649 100.0 1.244
-03.0 95 54.59 2886 2349 51173 12717 100.0 1.230
-02.0 96 55.15 2913 2393 52781 12784 100.0 1.214
-01.0 97 55.72 2941 2438 54441 12851 100.0 1.196
+00.0 98 56.28 2968 2483 56153 12916 100.0 1.179 ! Near Maximum !
+01.0 99 56.84 2995 2529 57920 12981 100.0 1.162 ! Near Maximum !
+02.0 100 57.41 3022 2574 59743 13045 100.0 1.145 ! Near Maximum !
+03.0 101 57.97 3048 2620 61626 13108 100.0 1.129 ! Near Maximum !
+04.0 102 58.53 3075 2666 63569 13170 100.0 1.113 ! Near Maximum !
+05.0 103 59.09 3102 2713 65576 13231 100.0 1.097 !DANGEROUS LOAD-DO NOT USE!
 
I was wondering if I might slip in a quick load request too! I'm currently trying to work up a 7mm08 load with Reloader 16, Lapua brass, Br-2's and 162 grain ELD-X's. Barrel length 22". There just isn't any Rel 16 data out. Got to reading this thread and thought maybe would help. Range testing now, have just tested in 0.5 grain increments 42 - 44 grains, have loaded 43 - 45 grains in 0.5 grain increments for next outing. Of course this next time out will take me to the maximum! Got to thinking QL data another source to look at!
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top