zach_destroys
Well-Known Member
So after building this rifle I decided that I'm realistically not going to end up doing any hunting with it and most of my shooting is out to the ranges I typically hunt at which is sub 500 yards. This rifle is just more than I need.
-Remington 700 SS action blueprinted by Deep South Tactical, cerakote OD Green
-26" Wilson stainless barrel, saami chamber, threaded 5/8x25, fluted Remington varmint profile. Spun up and chambered by DST
-XLR magnesium Element 4.0 chassis, cerakote Burnt Bronze
-Hawkins 20moa rings
-APA little bastard brake
-5rd Mag
-Airtech recoil pad
PO had the bolt handle rewelded, only 30 rounds down the barrel so far breaking it in. Cleaned after every shot for the 1st 5 rounds. Cleaned every 5 rounds after that. My bathroom scale reads 10.8-11lbs with the 3-15 SWFA. Stock trigger, single stage, very crisp but unknown pull weight, I have it adjusted down. I'd be interested in trading for a left handed Tikka T3x in 243, 6.5 Creed, 7mm-08, 308, maybe 300wsm plus cash. Other rifles may be considered. Would also consider Western Mountaineering down bags.
I'd like to get $2,000 for the rifle alone. It's basically brand new.
Components:
-43x Hornady 220gr precision hunter - $150
-57x Hornady brass - $57
-100x ADG brass, 43x 1x fired and primed, 25x 2x fired, 2x Unfired but primed, 30x virgin - $200
Factory LSS stock - free just pay shipping
Forster Micrometer Seating die - $75
RCBS FL die set - $40
93x 181gr Hammer Hunter - $100
194x 200gr Nosler Accubond -$220
I don't want to sell components until the rifle sells. I can send more pics upon request. Feel free to ask any questions or make an offer. Thanks for looking
-Remington 700 SS action blueprinted by Deep South Tactical, cerakote OD Green
-26" Wilson stainless barrel, saami chamber, threaded 5/8x25, fluted Remington varmint profile. Spun up and chambered by DST
-XLR magnesium Element 4.0 chassis, cerakote Burnt Bronze
-Hawkins 20moa rings
-APA little bastard brake
-5rd Mag
-Airtech recoil pad
PO had the bolt handle rewelded, only 30 rounds down the barrel so far breaking it in. Cleaned after every shot for the 1st 5 rounds. Cleaned every 5 rounds after that. My bathroom scale reads 10.8-11lbs with the 3-15 SWFA. Stock trigger, single stage, very crisp but unknown pull weight, I have it adjusted down. I'd be interested in trading for a left handed Tikka T3x in 243, 6.5 Creed, 7mm-08, 308, maybe 300wsm plus cash. Other rifles may be considered. Would also consider Western Mountaineering down bags.
I'd like to get $2,000 for the rifle alone. It's basically brand new.
Components:
-43x Hornady 220gr precision hunter - $150
-57x Hornady brass - $57
-100x ADG brass, 43x 1x fired and primed, 25x 2x fired, 2x Unfired but primed, 30x virgin - $200
Factory LSS stock - free just pay shipping
Forster Micrometer Seating die - $75
RCBS FL die set - $40
93x 181gr Hammer Hunter - $100
194x 200gr Nosler Accubond -$220
I don't want to sell components until the rifle sells. I can send more pics upon request. Feel free to ask any questions or make an offer. Thanks for looking
