Fiftydriver
Official LRH Sponsor
Have some new years deals to offer members here on Long Range Hunting.
First is one of my APS Prowler rifles chambered in 27 Stalker
The Prowler is my new receiver that Defiance Machine has agreed to build me, made to my own specs and at a very good price point. The goal of the Prowler model rifles is to offer extreme quality yet at a price point that is significantly lower then my Stalker ($4800BP) or Raptor ($5400BP) line of rifles. My Prowler rifles are held to the exact same accuracy standards as my Stalker line of rifles, that being 1/2 moa at 800 yards.
This rifle is chambered in my 27 Stalker. Two loads have been developed in this rifle. One using the 170 gr berger elite hunter at just over 3300 fps. Rifle actually drove this bullet over 3400 fps but accuracy was a bit better at around 3320 fps so went with that load.
The second load uses the newer Barnes 155 gr LRX loaded to a smoking 3575 fps
. Also shots extremely well.
This rifle is new condition, has only had two load developments down the barrel.
Asking $3200 for the rifle(optics not included) and will throw in a set of custom loading dies ($375 value) at no charge. Comes with 50 formed brass.
Can also take a 50% deposit to hold rifle for up to 3 months when second payment would be due. First come first serve as always.
APS NEW YEARS DEAL #2
I have three APS Stalker Quick Build projects in the shop. What these are is i have components to build three if my Stalker rifles here ready to roll in most of my wildcat chamberings in the Stalker, Allen Mag or Allen Xpress line of wildcats with lapua class head diameter.
These would come with my Stalker Hunter receiver, fluted stainless bartlein barrel of 26-28" depending on caliber, mcmillan game hunter stock with many finish options available, trigger tech special trigger adjusted to customers desired pull weight. Option for DM system or Sunny Hill internal mag with hinged floorplate. All fully function tested, all with load development done for one bullet of choice and all would be accuracy tested at a minimum of 800 yards to prove accuracy potential before shipping. Also includes all shipping/insurance cost to your FFL.
The Quick Build Stalker projects are generally shipped within 3 months of placing order and often times much shorter wait then that. This is compared to 10-12 months for an order from scratch project.
these Quick Build Stalker Hunter rifles starts at $4800 and tops out around $5400 depending on options wanted. Deal is i will throw in die set($375 value) at no charge. Again we can also do a 50-50 payment plan over 3 months as well if wanted.
some limited options available for the Carbon Stalker hunter rifles as well.
Pricing for the Carbon Stalker Hunter can vary so we can talk over availability and pricing if interested.
Great way to get into a world class long range big game rifle without much of a wait and a pretty good deal with free set of dies also!!
If interested or have questions please send to my email address at [email protected]
First is one of my APS Prowler rifles chambered in 27 Stalker
The Prowler is my new receiver that Defiance Machine has agreed to build me, made to my own specs and at a very good price point. The goal of the Prowler model rifles is to offer extreme quality yet at a price point that is significantly lower then my Stalker ($4800BP) or Raptor ($5400BP) line of rifles. My Prowler rifles are held to the exact same accuracy standards as my Stalker line of rifles, that being 1/2 moa at 800 yards.
This rifle is chambered in my 27 Stalker. Two loads have been developed in this rifle. One using the 170 gr berger elite hunter at just over 3300 fps. Rifle actually drove this bullet over 3400 fps but accuracy was a bit better at around 3320 fps so went with that load.
The second load uses the newer Barnes 155 gr LRX loaded to a smoking 3575 fps
. Also shots extremely well.This rifle is new condition, has only had two load developments down the barrel.
Asking $3200 for the rifle(optics not included) and will throw in a set of custom loading dies ($375 value) at no charge. Comes with 50 formed brass.
Can also take a 50% deposit to hold rifle for up to 3 months when second payment would be due. First come first serve as always.
APS NEW YEARS DEAL #2
I have three APS Stalker Quick Build projects in the shop. What these are is i have components to build three if my Stalker rifles here ready to roll in most of my wildcat chamberings in the Stalker, Allen Mag or Allen Xpress line of wildcats with lapua class head diameter.
These would come with my Stalker Hunter receiver, fluted stainless bartlein barrel of 26-28" depending on caliber, mcmillan game hunter stock with many finish options available, trigger tech special trigger adjusted to customers desired pull weight. Option for DM system or Sunny Hill internal mag with hinged floorplate. All fully function tested, all with load development done for one bullet of choice and all would be accuracy tested at a minimum of 800 yards to prove accuracy potential before shipping. Also includes all shipping/insurance cost to your FFL.
The Quick Build Stalker projects are generally shipped within 3 months of placing order and often times much shorter wait then that. This is compared to 10-12 months for an order from scratch project.
these Quick Build Stalker Hunter rifles starts at $4800 and tops out around $5400 depending on options wanted. Deal is i will throw in die set($375 value) at no charge. Again we can also do a 50-50 payment plan over 3 months as well if wanted.
some limited options available for the Carbon Stalker hunter rifles as well.
Pricing for the Carbon Stalker Hunter can vary so we can talk over availability and pricing if interested.
Great way to get into a world class long range big game rifle without much of a wait and a pretty good deal with free set of dies also!!
If interested or have questions please send to my email address at [email protected]
