New 300 win mag need load advice

Coueshuntr

Member
Joined
Nov 30, 2019
Messages
10
Location
Arizona
Hello folks,
I just got a Savage model 111 in the 300 win mag I'm looking for some load advice I'm planning to hunt with this gun but I'm new to the caliber so any info will help thanks
 
Hello folks,
I just got a Savage model 111 in the 300 win mag I'm looking for some load advice I'm planning to hunt with this gun but I'm new to the caliber so any info will help thanks
what powders do you have at hand and what bullet are you wanting to shoot
 
I run Ramshot magnum. 82grs with 165 80grs with 180. These are max. Use a fed 215m primer.
 
I am running the burger 185 juggernaut with 79 grains of H 1000 powder and a CCI 250 primer cartridge base to ogive 2.890 inches with a .010 jump
5DEF6CC6-B686-4305-86DD-8E9D7D7528DD.jpeg
 
Last edited:
I got a 110 High Country 300WM recently. 1/10" twist. 24" barrel.

Bullet: 212 ELDX
Powder: AA4350 65.5gr
Primer: WLRM
Case: Win or PPU
COAL: 3.475" (mag length)
MV: 2755
SD: 4

I shot two groups with same powder and charge. Different cases comparing WIN with PPU (Privi Partisan) Same POI and velocity very close. After the first group I went .3 mil down. I could have put all these right on top of each other for a .46" group!

I'm testing RL-23 presently. Velocity up above 2800fps, but groups are slightly over MOA.

AA4350 working great for 168gr Amax too. Although you want a hunting bullet, so I'd stick to Barnes or bonded bullets.
 

Attachments

  • 8F8FD97F-C1D8-4155-8D1F-6713F7471F0A.jpeg
    8F8FD97F-C1D8-4155-8D1F-6713F7471F0A.jpeg
    2.2 MB · Views: 168
  • E0320B0B-73F9-4260-A550-C8A64131CA7E.jpeg
    E0320B0B-73F9-4260-A550-C8A64131CA7E.jpeg
    1.9 MB · Views: 151
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top