Randy338
Well-Known Member
I need to get setup for neck turning. Not removing alot just for cleanup on a 375 Cheytac....Give me some ideas of the best methods and equipment Please,
Need setup for neck turning
- Thread starter Randy338
- Start date
Help Support Long Range Hunting Forum
Mikecr
Well-Known Member
Can't go wrong with Sinclair's system/tools
GaCop
Active Member
Ditto on Sinclair.........excellent quality tools.
Tom
Tom
boomtube
Well-Known Member
Agree that Sinclair makes/sells fine tools. Expensive too. Far more than I wanted to spend just to clean up a few necks.
I settled on the Forster HOT-100 hand held neck turner, most features at a more reasonaable cost from MidwayUSA. Carbide cutter, easy to set and use micro-calibrated screw (.001") for the cutter, inexpensive pilots. Don't much like the plastic shell holder device but it works fine.
I settled on the Forster HOT-100 hand held neck turner, most features at a more reasonaable cost from MidwayUSA. Carbide cutter, easy to set and use micro-calibrated screw (.001") for the cutter, inexpensive pilots. Don't much like the plastic shell holder device but it works fine.
