SOLD/EXPIRED Need NEW .270 Peterson brass - have H1000 to trade

[Muddyboots]

Powder not for sale, TRADE ONLY.
FTF SW MI - need 50 NEW Peterson .270 Win brass. Will trade 1lb H1000 for this brass. I will drive reasonable distance 1/2 way to meet you. I may be in GR Friday for the outdoor show at the Deltaplex for those in GR area.

This is a FTF deal ONLY! I cannot ship, don't ask.

 

[crystalgayleguy]

just curious did you find any

 

[Muddyboots]

Not yet! This is harder to find than H1000!

 

[Veteran]

Not yet! This is harder to find than H1000!

As far as I can tell, only Grafs and Brownell's even carry it. I will let you know if I see it, but another idea, though not perfect or painless is to buy some Lapua 30'06 brass and neck it down to .270? You may just want the Peterson period, but it is an alternative perhaps. Lapua doesn't make .270 brass, but it was originally derived from the the 30'06 case I think which is available from Lapua now. Anyway something to look into or consider as you may find .270 in Peterson is a wait or unobtanium like 215 Bergers.
Maybe others have some thoughts on this?

 

[Predator 22]

As far as I can tell, only Grafs and Brownell's even carry it. I will let you know if I see it, but another idea, though not perfect or painless is to buy some Lapua 30'06 brass and neck it down to .270? You may just want the Peterson period, but it is an alternative perhaps. Lapua doesn't make .270 brass, but it was originally derived from the the 30'06 case I think which is available from Lapua now. Anyway something to look into or consider as you may find .270 in Peterson is a wait or unobtanium like 215 Bergers.
Maybe others have some thoughts on this?

30-06 brass is considerably shorter than 270 or 280.
Muddy, I have some new Norma if you are interested?

 

[Muddyboots]

30-06 brass is considerably shorter than 270 or 280.
Muddy, I have some new Norma if you are interested?

Thank you for your thoughtfulness and generosity! I already have 50 Peterson so like to stay with them.
Thx!!

 

[Veteran]

Muddy, sounds like you really just want more Peterson brass and will stay on the hunt for it. I will let you know if I see it. Maybe you'll find a trade too.

Just out of curiousity and wanting to learn more I did find this previous LRH thread on converting 30 06 to .270 pros and cons.

Sounds like it takes about 3 firings to stretch it to length....its only off a few .01 to start.

Interesting is that JE Custom commented they used to do this all the time...towards end of the comments.

Making .270 out of 30-06 brass?

I ran across a deal on some unfired Lapua 30-06 brass, and I'm going to re-size it to .270 Win, for a good spring project. Is there a preferred method to ensure the neck thickness stays in check? My current thoughts are: 1)Use my FL bushing sizer die w/ a slightly larger bushing so that the...

www.longrangehunting.com

 

[Muddyboots]

I have some Rem brass and some Sig but I have great success with Peterson so like to just finalize load with just Peterson if I could. Thx for everybody's help! This is what makes LRH special place.

 

[Muddyboots]

Well thanks to thoughtfulness of LRH folks I have some brass coming and appreciate ALL the suggestions and offers. PIF is alive and well on LRH! Thank you!

 

[zr600]

Well thanks to thoughtfulness of LRH folks I have some brass coming and appreciate ALL the suggestions and offers. PIF is alive and well on LRH! Thank you!

Did you say you have some sig 270win brass? If so I maybe interested in it.

 

[Muddyboots]

Sorry, already promised out once I get the Peterson.