E elmerdeer Well-Known Member Joined Jan 21, 2007 Messages 176 Apr 5, 2007 #1 Need load for 7rem mag With imr7828 &160 accubonds? Thanks Elmer
remingtonman_25_06 Well-Known Member Joined Jun 4, 2003 Messages 2,436 Location Hermiston, Oregon Apr 6, 2007 #2 Start around 61-62g. Max should be around 64-65g according to Nolsers #5 manual. Velocity should be a tad over 3000fps on the top end. I had good luck with 61g RL-22 and the 160g AB. .275" 3 shot group at 100 yards, kinda slow though at 2850fps.
Start around 61-62g. Max should be around 64-65g according to Nolsers #5 manual. Velocity should be a tad over 3000fps on the top end. I had good luck with 61g RL-22 and the 160g AB. .275" 3 shot group at 100 yards, kinda slow though at 2850fps.
Ol'Gator Well-Known Member Joined Dec 15, 2005 Messages 168 Location Central Florida Apr 6, 2007 #3 I have to look up the info but using same bullet and powder my groups are staying right at 1 1/4 @ 200 yds. Then again, every gun is different.
I have to look up the info but using same bullet and powder my groups are staying right at 1 1/4 @ 200 yds. Then again, every gun is different.
Ol'Gator Well-Known Member Joined Dec 15, 2005 Messages 168 Location Central Florida Apr 7, 2007 #4 My best load (most accurate) when using 65.5 grains IMR 7828 and Fed. 215 Match primers. As you know, what works for one gun may not for another. Bob
My best load (most accurate) when using 65.5 grains IMR 7828 and Fed. 215 Match primers. As you know, what works for one gun may not for another. Bob