Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Neck Sizing with a FL Die
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="johngibbs222" data-source="post: 2299368" data-attributes="member: 49619"><p>To neck size you'll need the decap rod in there as a sizing mandrel, I kept one that the decap pin had broken off and I polished it in a hand drill to take 0.001" off the diameter for about 200 once fired remington 223 brass which were absolute rubbish with the bullet falling into the case sometimes, an issue that didn't occur with locally made cases. That sorted the issue. You may find it pays to slightly bellmouth the case to get the bullet started like you practise on pistol rounds with cast bullet reloading.</p><p>I got to say that as I use those r-p cases they get thrown and I use PPU brass for 223 which has no problems</p></blockquote><p></p>
[QUOTE="johngibbs222, post: 2299368, member: 49619"] To neck size you'll need the decap rod in there as a sizing mandrel, I kept one that the decap pin had broken off and I polished it in a hand drill to take 0.001" off the diameter for about 200 once fired remington 223 brass which were absolute rubbish with the bullet falling into the case sometimes, an issue that didn't occur with locally made cases. That sorted the issue. You may find it pays to slightly bellmouth the case to get the bullet started like you practise on pistol rounds with cast bullet reloading. I got to say that as I use those r-p cases they get thrown and I use PPU brass for 223 which has no problems [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Neck Sizing with a FL Die
Top