My PSE TAC 15 i crossbow puts 6 arrows into 1.875 inches -- at 100 yards!

Len Backus

Administrator
Staff member
Joined
May 2, 2001
Messages
7,520
It is so much fun to watch through the scope as the arrows go "thunk" into the target.

I shot this group mostly with just one arrow that I had sorted for. So the 2 holes on the left were the first, then I adjusted windage on the scope and continued shooting the group.

Did I mention that I love this crossbow? gun)

Did I mention that I am now a PSE TAC 15 crossbow dealer? :):):)

Free - 6 arrows with the purchase of a TAC series crossbow at the LRH Gear Shop

PSE-TAC15-Crossbow-1575.jpg
 
Last edited:
Great shooting Len. How fast is the TAC 15 and what grain field tips are you shooting ?

BigBuck
 
400 fps, 85 grain tip. Total weight is 425 grains. I'll be using 100 grain broadheads.
 
I wonder what kind of speeds its going at out that far? Are you planning to shoot them through a chrony when you start reaching out that far? It would be interesting to see how much kenetic energy its got...
 
Len nice shooting. How are you liking the jewel trigger?

I agree with Matt shoot it thru the crony at 100 yards!
 
I will shoot it through a chrony when I get a little further along. I expect the 100 ys speed to be in the range of 330 or so. Kinetic energy will not be an issue. I think it is over rated as a means of defining arrow killing power anyway. It takes so little to push a sharp blade through an animal.

Jim, the trigger is great. I was getting all those wonderful groups with the original factory trigger, too, at the yardages I was shooting at. It's just that I am so used to a 2 pound or so pull weight that I thought I better stick with that for consistency throughout my archery and rifle hunting season. And the PSE guys get the same 100 yard groups as I just got with the factory trigger.
 
Last edited:
I will shoot it through a chrony when I get a little further along. I expect the 100 ys speed to be in the range of 330 or so. Kinetic energy will not be an issue. I think it is over rated as a means of defining arrow killing power anyway. It takes so little to push a sharp blade through an animal.

Jim, the trigger is great. I was getting all those wonderful groups with the original factory trigger, too, at the yardages I was shooting at. It's just that I am so used to a 2 pound or so pull weight that I thought I better stick with that for consistency throughout my archery and rifle hunting season. And the PSE guys get the same 100 yard groups as I just got with the factory trigger.

Len. Great shooting!!!!!

I noticed that you refer to your cross bow as a TAC 15 I Is that correct or do you have the one
that uses the AR 15 lower (TAC 15).

just curious to see what you though about the I model is that was the one you had.

The one I ordered was the TAC 15 because I had a lower with a custom trigger.

J E CUSTOM
 
OOOOkay, help me out here guys, I might be missing something. The picture I am looking at looks like a group of six with the arrow still in the far right hole. That group looks to be about 5.5 to 6 inches. where is the sub two inch group?
 
Here you go: :)
I shot this group mostly with just one arrow that I had sorted for. So the 2 holes on the left were the first, then I adjusted windage on the scope and continued shooting the group.

So you must mentally superimpose the 2 holes on the left over the 4 holes on the right. I shot one arrow at a time, walked down to the target, retrieved the arrow, went 100 yards back to my bow, shot the next shot, etc.

Really tiring to do it that way! lightbulb
 
Len. Great shooting!!!!!

I noticed that you refer to your cross bow as a TAC 15 I Is that correct or do you have the one
that uses the AR 15 lower (TAC 15).

just curious to see what you though about the I model is that was the one you had.

The one I ordered was the TAC 15 because I had a lower with a custom trigger.

J E CUSTOM
What am I missing here. I thought the tac 15 is only sold as a upper and the AR Lower you have to buy seperate.
 
Warning! This thread is more than 15 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top