Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
My 10 rd load development
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Mike 338" data-source="post: 1462729" data-attributes="member: 41338"><p>I just did this thing with a new unfired factory rifle (6.5 creed / Savage Longrange Hunter) which I have never loaded for. Had a box of Hornady 143 eldx on hand so that's what I chose along with some H-4350 and fed 205's, seated 20 thousandths jump. Found a node with a 7 fps spread so I picked the middle one. Got just under 1/4 moa at 100 yards and just over 1/2 moa at 200. Using a fixed 10 power scope so I might have done better at 200 otherwise, but maybe not. I'll try it again on a not so windy day and see how it does.</p></blockquote><p></p>
[QUOTE="Mike 338, post: 1462729, member: 41338"] I just did this thing with a new unfired factory rifle (6.5 creed / Savage Longrange Hunter) which I have never loaded for. Had a box of Hornady 143 eldx on hand so that's what I chose along with some H-4350 and fed 205's, seated 20 thousandths jump. Found a node with a 7 fps spread so I picked the middle one. Got just under 1/4 moa at 100 yards and just over 1/2 moa at 200. Using a fixed 10 power scope so I might have done better at 200 otherwise, but maybe not. I'll try it again on a not so windy day and see how it does. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
My 10 rd load development
Top