Up for grabs is a Manners T4A in GAP camo for a RH Rem 700 SA. Barrel channel is for M24 contour. Includes a 14" Area419 Arca Rail, Mesa BDM, Wiebad cheek pad, and SAP 2 round holder. Action and BDM area is bedded. The front of the BDM had to be modified so the action screw holes on the rail and BDM would line up correctly. The action screw hole on the Arca rail has not been drilled out. Typically some would just get a longer screw or drill it out, etc. I basically put the front action screw in the BDM first, then set the rail on top and used the forearm screws to secure it. It locked it down pretty tight with no flexing what so ever. I made spacers to fit between the arca rail and bottom of the forearm. On the T4A, it's pretty straight from the front of the stock until you get about 2-3" in front of the BDM. At that point it has a slight downward angle. Without the spacers it would bend the rail a good bit. The spacers help eliminate that and the rail is pretty sturdy with out any flexing.
This has been a really good stock over the years, but I have to let it go.
Will be posted on other sites as well. First I'll take it gets it.
$975 TYD
Feel free to PM me with any questions or info on payment options. I can send additional pics if needed. I work 8-5 M-F so I will try to get back to you ASAP.
Thanks for looking. JMD82
This has been a really good stock over the years, but I have to let it go.
Will be posted on other sites as well. First I'll take it gets it.
$975 TYD
Feel free to PM me with any questions or info on payment options. I can send additional pics if needed. I work 8-5 M-F so I will try to get back to you ASAP.
Thanks for looking. JMD82
Last edited:
