Lefty G-gear
Well-Known Member
Practical & Tactical Model Seven 7mm SAUM, stainless 24", 150 new ADG brass, more.
PTG detachable box magazine (DBM) bottom metal + two 5-rd. magazines. (Fitted by gunsmith to new laminate stock.)
BOYD's laminated 'At-One' adjustable stock (ambidextrous).
EGW scope rails: one 20-MOA and one zero-MOA (photo shows 20-MOA, but I swapped it.)
VORTEX Crossfire II
4-12x50 AO Scope and Shade (optional.)
Slip-on LimbSaver pad. - Fits rather perfectly.
3-boxes (50-each) New unfired ADG brass. (Paid $90/box.)
2-boxes of factory Remington 150-gr. Core-Lokt PSP ammo.
Hornady FL sizer die and micrometer seating die and shellholder.
Wilson case gauge for 7mm SAUM/300 SAUM. PHOTOS BELOW.
I have a doctors scale:
Subtract my weight
Rifle with scope = 9.5 lbs.
Without scope = 7.5 lbs.
(Magazine attached.)
The rifle originally came with a crappy black plastic stock and feeding issues (hence the new configuration with center-feed magazines), and a 22-inch barrel = now a new 24-inch free-floated barrel. (I still have the old stock, barrel and bottom metal.)
I have fired a few boxes of $40 factory ammo. - Remington has crappy brass and a bad crimp, so I canned what I shot - and read all about ADG brass and bought that a couple years ago before the 'plandemic' and 'elect-shun.'
I haven't got around to processing and testing any of the ADG brass, and thus don't know how well it can shoot. - But I did get 1-inch groups from the crappy Remington ammo. (And, I was working out of State a lot - no time to do what I planned.)
I'm letting this 'almost new' 7mm SAUM rig go, cuz I'm a lefty and have a few LH bolt guns to do with (7mm RM, 30-06) plus a RH 6.5 PRC, and an AR-10 6.5CM, and .308.
Everything: $1600 shipped.
($1400 without scope and rings.)
Rifle shipped to your FFL.
And the rest to your door or FFL.
Discuss payment arrangements. (307) 851-6011
Any questions?
CHRIS GEGERE a.k.a. "G-gear"
PO BOX 54
204 RIVER ST.
HYATTVILLE, WY 82428
[email protected]
NOSLER LOAD DATA 
7mm SAUM
www.nosler.com
(Nov. 1, 2021) UPDATE: To give you an idea.
On Gunbroker, they have a stock Model Seven (7mm SAUM) like mine was, but it is $1075 + $40 S/H to your FFL.
But there is no adjustable laminated stock, no DBM, no ammo, brass, dies, etc. as with my deal $1400 without scope.
Plus, that rifle has been shot more than mine.
Here is their link (for suckers):
If mine is not sold here soon on LRH, I will put it on Gunbroker.
I do have the original stock and bottom metal + the old 22-inch barrel.
PHOTOS:
PTG detachable box magazine (DBM) bottom metal + two 5-rd. magazines. (Fitted by gunsmith to new laminate stock.)
BOYD's laminated 'At-One' adjustable stock (ambidextrous).
EGW scope rails: one 20-MOA and one zero-MOA (photo shows 20-MOA, but I swapped it.)
VORTEX Crossfire II
4-12x50 AO Scope and Shade (optional.)Slip-on LimbSaver pad. - Fits rather perfectly.
3-boxes (50-each) New unfired ADG brass. (Paid $90/box.)
2-boxes of factory Remington 150-gr. Core-Lokt PSP ammo.
Hornady FL sizer die and micrometer seating die and shellholder.
Wilson case gauge for 7mm SAUM/300 SAUM. PHOTOS BELOW.
I have a doctors scale:
Subtract my weight
Rifle with scope = 9.5 lbs.
Without scope = 7.5 lbs.
(Magazine attached.)
The rifle originally came with a crappy black plastic stock and feeding issues (hence the new configuration with center-feed magazines), and a 22-inch barrel = now a new 24-inch free-floated barrel. (I still have the old stock, barrel and bottom metal.)
I have fired a few boxes of $40 factory ammo. - Remington has crappy brass and a bad crimp, so I canned what I shot - and read all about ADG brass and bought that a couple years ago before the 'plandemic' and 'elect-shun.'
I haven't got around to processing and testing any of the ADG brass, and thus don't know how well it can shoot. - But I did get 1-inch groups from the crappy Remington ammo. (And, I was working out of State a lot - no time to do what I planned.)
I'm letting this 'almost new' 7mm SAUM rig go, cuz I'm a lefty and have a few LH bolt guns to do with (7mm RM, 30-06) plus a RH 6.5 PRC, and an AR-10 6.5CM, and .308.
Everything: $1600 shipped.
($1400 without scope and rings.)Rifle shipped to your FFL.
And the rest to your door or FFL.
Discuss payment arrangements. (307) 851-6011
Any questions?
CHRIS GEGERE a.k.a. "G-gear"
PO BOX 54
204 RIVER ST.
HYATTVILLE, WY 82428
[email protected]
NOSLER LOAD DATA 7mm SAUM
7mm Rem Short Action Ultra Magnum Load Data
Explore the world of Nosler, renowned for crafting the finest bullets, ammunition, rifles, and brass. Discover our extensive lineup, including Partition, AccuBond, E-Tip, Ballistic Tip, Custom Competition, and more. Experience superior quality and performance with Nosler products.
www.nosler.com
(Nov. 1, 2021) UPDATE: To give you an idea.
On Gunbroker, they have a stock Model Seven (7mm SAUM) like mine was, but it is $1075 + $40 S/H to your FFL.
But there is no adjustable laminated stock, no DBM, no ammo, brass, dies, etc. as with my deal $1400 without scope.
Plus, that rifle has been shot more than mine.
Here is their link (for suckers):Remington Model Seven (Model 7) Stainless Mountain Rifle - 7MM Saum (7SAUM) - Bolt Action Rifles at GunBroker.com : 914136993
If mine is not sold here soon on LRH, I will put it on Gunbroker.
I do have the original stock and bottom metal + the old 22-inch barrel.
PHOTOS:
Attachments
Last edited:
