Manners T2 for Winchester Model 70.

[Punisher]

This stock is inlet for a Model 70 Featherweight (same as the FN) two left side flush cups and a badger rail.

it's the new model 70 with single piece floorplate.

this will come with the CDI bottoms metal that receives AI short action magazines. (You could changeto LA if you want since the action is the same length)

already has pillars and full action bedding.

retail I had $949 in this, but I'd go $550

picture is actual stock.

nothing but stock and bottom metal is included.

 

[DJ Fergus]

So this would work for short or long action?

 

[Punisher]

So this would work for short or long action?

Yes, but it takes a short action magazine with this bottom metal.

 

[Punisher]

You can buy the other bottom metal and go to long action.

 

[Gasman]

The barreled action in your photo looks like it has a short action receiver- right? Unlike Tikkas, Winchester 70 receivers come in either SA or LA and have different length footprints.

 

[Punisher]

The barreled action in your photo looks like it has a short action receiver- right? Unlike Tikkas, Winchester 70 receivers come in either SA or LA and have different length footprints.

the FN made model 70 is only one action length. So pre-64 and post 2008 are the same.

it has a short action bottom metal though.

screw spacing is 7 3/8"

 

[Punisher]

ttt