Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
AR15/10 Rifles
Looking for an AR-15 expert, intermittent feed issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Winkfish" data-source="post: 2496329" data-attributes="member: 98068"><p>I was changing only one item at a time and gathering info. Agreed if you change more than 1 variable at a time one will not be able to determine which change is impacting the results. </p><p> </p><p>Step 1 was change gas. Regardless of gas setting I was getting a failure mid mag.</p><p> To answer your question about brass position I will have to go and verify, which I will do.</p><p></p><p>Step 2: put gas back at 4.5 turns open. change buffer spring. fail</p><p></p><p>Step 3: with new buffer spring change gas. Fail</p><p></p><p>Step 4 replace buffer tube, go back to original spring. fail</p><p> with new buffer tube play with gas settings. fail</p><p> with +15% spring, and 4.5 turns open gas fail</p><p> with +15% spring and playing with gas fail.</p><p></p><p>Step 5 replace bolt carrier group then go through all the above again. fail</p><p></p><p>I will go take some pictures of where it sits with the magazine in it as you mentioned and report back.</p></blockquote><p></p>
[QUOTE="Winkfish, post: 2496329, member: 98068"] I was changing only one item at a time and gathering info. Agreed if you change more than 1 variable at a time one will not be able to determine which change is impacting the results. Step 1 was change gas. Regardless of gas setting I was getting a failure mid mag. To answer your question about brass position I will have to go and verify, which I will do. Step 2: put gas back at 4.5 turns open. change buffer spring. fail Step 3: with new buffer spring change gas. Fail Step 4 replace buffer tube, go back to original spring. fail with new buffer tube play with gas settings. fail with +15% spring, and 4.5 turns open gas fail with +15% spring and playing with gas fail. Step 5 replace bolt carrier group then go through all the above again. fail I will go take some pictures of where it sits with the magazine in it as you mentioned and report back. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
AR15/10 Rifles
Looking for an AR-15 expert, intermittent feed issue
Top