Ok, I know there has been a lot of conversation back and forth on the Leica 1600-B rangefinder, but for whatever reason I can't find the EXACT answer I'm looking for. When I called Leica 2 months ago I spoke to a representative there that promised me the rangefinder would give the compensated angle out to the 1600 yard mark. When I asked her about the 875 yard top out that I had heard about, she told me that was specifically for holdover measurement only and that I could get the EHR farther out. So I finally get the rangefinder and find out that none of my hand loads match any of the curves. I can't get the rangefinder to give me just the EHR at anything I range. So I called Leica today and was told by Mark that I have to use one of the curves no matter what and that the 875 yard mark is the farthest value that I can get the compensated angle for. Anything over that is just LOS. He gave me a number of their field supervisor and told me to call him and ask him to confirm. I'm a little miffed as to why I got 2 completely different answers from the same company. So I will ask the questions here.....Can I get the compensated angle (EHR) without using one of their ballistic curves and will it give me the EHR past 875 yards? This is going to determine whether I sell it and go buy the G7. Thanks for the help!!