Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Ladder testing at 1k- Detailed article and video
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Wachsmann" data-source="post: 911290" data-attributes="member: 10429"><p>The read was excellent...I have somewhat of a new sendero in 300RUM. Its been braked, beaded, trigger adjusted and has about 30 to 35 rounds down the barrel. I've been wanting to work up a load for this gun this year. So I started at 90.5 to 93 grains...in half grain incraments. Kept the seating depth the same at 3.64 which will work in my magazine. Bullet is 210VLD and retumbo for powder. I tried some longer seating depths but my casings were getting scratched up and it did not load very smooth. One of my problem is getting more of the 210VLD's....I also thought about the accubond 200 grain since I always see these bullets around and I don't want to burn up all my powder...powder and 210vld's are getting hard to come by. I will test this out probably this week maybe at 400 to 500 yards if I can find a clear spot. Will see how it shoots out in the dessert of Utah. gun)</p></blockquote><p></p>
[QUOTE="Wachsmann, post: 911290, member: 10429"] The read was excellent...I have somewhat of a new sendero in 300RUM. Its been braked, beaded, trigger adjusted and has about 30 to 35 rounds down the barrel. I've been wanting to work up a load for this gun this year. So I started at 90.5 to 93 grains...in half grain incraments. Kept the seating depth the same at 3.64 which will work in my magazine. Bullet is 210VLD and retumbo for powder. I tried some longer seating depths but my casings were getting scratched up and it did not load very smooth. One of my problem is getting more of the 210VLD's....I also thought about the accubond 200 grain since I always see these bullets around and I don't want to burn up all my powder...powder and 210vld's are getting hard to come by. I will test this out probably this week maybe at 400 to 500 yards if I can find a clear spot. Will see how it shoots out in the dessert of Utah. gun) [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Ladder testing at 1k- Detailed article and video
Top